Претраживање
Приказ резултата 21-30 од 42
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes
(Nice : International Society of Electrochemistry, 2010)
Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 ...
Corrosion of an austenite and ferrite stainless steel weld / Korozija zavarenog spoja austenitnog i feritnog nerđajućeg čelika
(Serbian Chemical Society, Belgrade, 2011)
Dissimilar metal connections are prone to frequent failures. These failures are attributed to the difference in the mechanical properties across the weld, the coefficients of thermal expansion of the two types of steels ...
Corroded scale analysis from water distribution pipes / Analiza korozionih ljuski u vodovodskim cevima
(Association of Chemical Engineers of Serbia, 2011)
The subject of this study were the steel pipes that are part of Belgrade's drinking water supply network. In order to investigate the mutual effects of corrosion and water quality, the corrosion scales on the pipes were ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, Belgrade, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum
(Belgrade : Association of the Chemical Engineers of Serbia, 2011)
The electrochemical synthesis of polyaniline (PANI) on mild steel, aluminum and copper from the sodium benzoate solutions has been investigated. It has been shown that thin, highly adherent, polyaniline films on the ...
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(Metals, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co coatings obtained under the same ...
The Influence of Sm Content on the Surface Morphology and Corrosion Behavior of Zn-Co-Sm Composite Coatings
(MDPI, 2023)
The influence of samarium, as an additional alloying element, on the morphology and corrosion performance of the Zn-Co-Sm alloy electrodeposited coatings, was investigated by scanning electron microscopy coupled with energy ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum / Sinteza i koroziono ponašanje polianilina na mekom čeliku, bakru i aluminijumu iz benzoatnih rastvora
(Association of Chemical Engineers of Serbia, 2011)
The electrochemical synthesis of polyaniline (PANI) on mild steel, aluminum and copper from the sodium benzoate solutions has been investigated. It has been shown that thin, highly adherent, polyaniline films on the ...
Electrochemical and surface characterization of ternary alloys of the system Ag-Cu-Zn in near neutral chloride solutions. / Elektrohemijska i površinska karakterizacija trokomponentnih legura sistema Ag-Cu-Zn u blisko neutralnim hloridnim rastvorima
(Univerzitet u Beogradu, Tehnički fakultet, Bor, 2015)
Alloys of the Ag-Cu-Zn system with wide range of silver content, selected to have similar phase compositions, were the subject of the research. Metals for all examined alloys are obtained by recycling of electronic waste. ...