Претраживање
Приказ резултата 41-50 од 79
Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
(Polymer Composites, 2021)
In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the ...
Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior
(MDPI, 2024)
While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart ...
Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide
(John Wiley and Sons Inc., 2023)
Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double ...
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
The Effect of Nanofibrillated Tempo-oxidized Cotton Linters on the Strength and Optical Properties of Paper
(Journal of Natural Fibers, 2022)
This study elaborates the application of composite films based on nanofibrillated cellulose obtained from cotton linters oxidized in the 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)/NaBr/NaClO system, with the use ...
Wash-dry cycle induced changes in low-ordered parts of regenerated cellulosic fibers
(Wiley-Blackwell, Hoboken, 2012)
Three regenerated cellulosic fiber types: lyocell, viscose, and modal were subjected to repetitive wetdry treatments. Simulated treatments showed reorganization of the internal fiber structure which could be determined by ...
CIRCULAR ECONOMY IMPLEMENTATION IN THE DEVELOPMENT OF FIRE-RETARDANT MATERIALS USED IN CONSTRUCTION, INDUSTRY, AND GENERAL-PURPOSE PRODUCTS
(Association of Metallurgical Engineers of Serbia, 2022)
During a fire, passive fire protection systems are designed to prevent the spread of flames, smoke, and toxic gases. The new fire-retardant (FR) material, used for passive fire protection, is created by combining copolymers ...
Effects of poly(vinyl alcohol) blending with Ag/alginate solutions to form nanocomposite fibres for potential use as antibacterial wound dressings
(Royal Society Publishing, 2022)
In this work, nanocomposite fibres and microfibres based on alginate and poly(vinyl alcohol) (PVA) with silver nanoparticles (AgNPs) were produced and characterized for potential application as antibacterial wound dressings. ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Dissimilar sintered calcium phosphate dental inserts as dentine substitutes: Shear bond strength to restorative materials
(Wiley, Hoboken, 2020)
The application of sintered calcium phosphate dental inserts in the central part of tooth cavities can reduce amount of embedded dental composite and polymerization shrinkage of final dental fillings. The aim of this study ...