Претраживање
Приказ резултата 1-8 од 8
Electricity production from biogas in Serbia assessment of emissions reduction
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Biogas represents a promising source for the production of clean energy. The objective of this paper was to quantij5; the potential for the reduction of emissions to the environment during the production of electricity ...
Diesel production by fast pyrolysis of miscanthus giganteus, well-to-pump analysis using the greet model
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2019)
In this paper "well-to-pump" environmental analysis of pyrolytic diesel from Miscanthus gigantheus is performed. The average annual yield of Miscanthus from III-V year of cultivation on 1 ha of chernozem soil in Serbia ...
High pressure densities and derived properties of biodiesel fuel produced by heterogeneous transesterification from biowaste
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2019)
High pressure density of biodiesel is a crucial parameter necessary for the Diesel engine design and performance improvement as well as proper combustion optimization. Biodiesel production utilizing biowaste as raw material ...
Thermal properties of directionally oriented polymer fibrous materials as a function of fibre arrangement at mesoscopic level
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2019)
Thermal properties of directionally oriented fibrous materials have been investigated in this research with the purpose of considering the influence of fibre arrangement at mesoscopic level. The range of various distributions ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Temperature fields in linear stage of friction stir welding effect of different material properties
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2019)
Friction stir welding is one of the procedures for joining the parts in solid state. Thermo-mechanical simulation of the friction stir welding of high-strength aluminium alloys 2024 T3 and 2024 T351 is considered in this ...
Influence of material velocity on heat generation during linear welding stage of friction stir welding
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...