Search
Now showing items 1-10 of 15
Modeling of disperse dye adsorption on modified polyester fibers
(University of Novi Sad, Faculty of Technology, 2020)
The results of the research on the ability of adsorption of dye on polyester fibers at a temperature of 98 °C are presented in this paper. The fibers were previously modified in aqueous solutions of NaOH, KOH or Al(OH)3. ...
Chemical durability of sintered glass-composite prepared from glass cullet and waste foundry sand
(Metallurgical & Materials Engineering, 2021)
In this study, the glass-composite was prepared using glass cullet and waste foundry sand as raw materials. The powder technology route was employed. The mixtures containing 10-50 wt% of the sand were sintered at T = 750 ...
Solvent extraction and entrainment problem
(Association of Metallurgical Engineers of Serbia, 2020)
Applications of solvent extraction operations and processes play one of the most important roles in Hydrometallurgy. Therefore, in this brief review, some general concepts for selected representative applications are ...
Effect of process parameters on the phase transformation kinetics in copper-based alloys and composites
(Metallurgical & Materials Engineering, 2020)
Copper-based alloys and composites, owing to their convenient properties, are being considered essential materials in various industries. Since copper possesses an ability to develop high corrosion resistance, putting it ...
Estimation of phosphorus distribution ratio at the end of blowing in bof
(Metallurgical & Materials Engineering, 2021)
In integrated steel plants, the removal of phosphorous normally takes place during the primary basic oxygen furnace (BOF) steelmaking process. Phosphorous is usually introduced to the integrated steelmaking process through ...
Simulation of velocity profile inside turbulent boundary layer
(Association of Metallurgical Engineers of Serbia, 2020)
The second-order differential equation with a general polynomial solution [1], is adapted for simulation of complex velocity profile inside the turbulent boundary layer. Consequently, the simulation strategy is suggested.
Algorithm for quantifying the particle size distribution of non-metallic inclusions formation in steel production
(Metallurgical & Materials Engineering, 2021)
When the quantitative characterization of non-metallic inclusions in steel is done and the effect of limiting factors is assessed, and based on that the possibility of reconstruction of the total content of non-metallic ...
Animal models in biocompatibility assessments of implants in soft and hard tissues / PRIMENA ANIMALNIH MODELA U PROCENI BIOKOMPATIBILNOSTI IMPLANTATA ZA TVRDA I MEKA TKIVA
(University of Belgrade, Faculty of Veterinary Medicine, 2022)
The ethical dilemmas of using animals as in vivo models in preclinical and clinical examinations have been increasingly present in recent decades. Small laboratory animals (rats, rabbits) will continue to be used because ...
COMPARATIVE CHEMOMETRIC ANALYSIS, RANKING AND SELECTION OF LIPOPHILICITY PARAMETERS OF 6-CHLORO-1,3,5-TRIAZINE DERIVATIVES WITH ACYCLIC AND CYCLIC SUBSTITUENTS
(University of Novi Sad, Faculty of Technology, 2022)
In the present paper, the chemometric analysis, ranking and selection of the most suitable in silico lipophilicity parameters of eight alkyl and cycloalkyl s-triazine derivatives were carried out. The lipophilicity parameters ...
Enzymatic synthesis of fructo-oligosaccharides using Pectinex® Ultra SP-L: a study of experimental conditions / Enzimska sinteza frukto-oligosaharida upotrebom Pectinex® Ultra SP-L: ispitivanje uticaja eksperimentalnih uslova
(Institute for Food Technology, 2021)
The obvious benefits of employing prebiotics as functional components in many foods
and feed products have resulted in higher demand for their industrial production, necessitating the
development of more efficient and ...