Search
Now showing items 1-10 of 700
Influence of different carbon monolith preparation parameters on pesticide adsorption / Uticaj parametara dobijanja karbon monolita na adsorpciju pesticida
(Serbian Chemical Society, Belgrade, 2013)
The capacity of carbon monolith for pesticide removal from water, and the mechanism of pesticide interaction with the carbon surface were examined. Different carbon monolith samples were obtained by varying the carbonization ...
Mechanical properties correlation to processing parameters for advanced alumina based refractories
(International Institute for the Science of Sintering, Beograd, 2012)
Alumina based refractories are usually used in metallurgical furnaces and their thermal shock resistance is of great importance. In order to improve thermal shock resistance and mechanical properties of alumina based ...
The antioxidant properties of dried extracts from spent espresso coffee / Antioksidativna svojstva sušenih ekstrakata iz otpadne espreso kafe
(Association of Chemical Engineers of Serbia, 2013)
The importance of coffee waste utilization is based on the fact that it contains a large amount of biologically valuable components. Preparation of espresso coffee produces substantial quantities of polyphenolic acids that ...
Effects of operating parameters on efficiency of lead removal by complexation-microfiltration process / Uticaj radnih parametara na efikasnost uklanjanja jona olova pomoću kompleksirajuće-mikrofiltracionog procesa
(Association of Chemical Engineers of Serbia, 2012)
The majority of lead content found in the environment is a result of human activities. Heavy metals can be hazardous because they tend to bioaccumulate. A complexation-microfiltration process for the removal of Pb(II) ions ...
Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique
(Science of Sintering, 2017)
In this work, Glancing Angle Deposition technique was used for obtaining nanostructured nickel thin film with vertical posts on glass substrate which was positioned 75 degrees with respect to the substrate normal and rotated ...
Possibility of carbon steel eafd solidification/stabilization in concrete
(Editura Stiintifica Fmr, Bucharest, 2013)
Steel scrap recycling is generally performed by direct smelting of scrap in an electric arc furnace, generating about 2% of dust per charge. Electric arc furnace dust (EAFD) is characterized as a hazardous material, due ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...
Energy integration of nitric acid production using Pinch methodology / Energetska integracija proizvodnje azotne kiseline primenom Pinch metodologije
(Association of Chemical Engineers of Serbia, 2015)
Pinch methodology was applied to the heat exchangers network (HEN) synthesis of nitric acid production. The integration is analyzed in two ways, and the results are presented as two different solutions: i) the first solution ...
Economizer water-wall damages initiated by feedwater impurities
(Savez hemijskih inženjera, Beograd, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
Chemometric Approach in Studying of the Retention Behavior and Lipophilicity of Potentially Biologically Active N-Substituted-2-phenylacetamide Derivatives
(Soc Brasileira Quimica, Sao Paulo, 2014)
The potential biological activity of a molecule largely depends on its lipophilicity. The lipophilicity of derivatives of N-substituted-2-phenylacetamide was investigated experimentally, by applying thin-layer chromatography ...