Претраживање
Приказ резултата 1-10 од 384
The influence of electroless plated chromium on printing properties of aluminum offset printing plate
(Journal of the Serbian Chemical Society, 2002)
A method for the improvement of the printing properties of offset printing forms is presented. Specimens of technical aluminum were electrochemically roughened and treated in different alkaline solutions of chromium chloride ...
The sorption and crystallographic characteristics of alumina activated in a reactor for pneumatic transport / Sorpcione i kristalografske karakteristike alumine dobijene u reaktoru za pneumatski transport čestica
(Serbian Chemical Society, 2006)
Active transition alumina powders were obtained by flash calcination of gibbsite in a reactor for pneumatic transport in the dilute, two-phase flow regime in the temperature interval from 883 to 943 K with a residence time ...
Methanol oxidation at platinum electrodes in acid solution: Comparison between model and real catalysts / Oksidacija metanola na platinskim elektrodama u kiseloj sredini - poređenje model i realnih katalizatora
(Serbian Chemical Society, Belgrade, 2006)
Methanol oxidation in acid solution was studied at platinum single crystals, Pt(hkl), as the model catalyst, and at nanostructural platinum supported on high surface area carbon, Pt/C, as the real catalyst. The linear ...
Utilization of baker's yeast (Saccharomyces cerevisiae) for the production of yeast extract: Effects of different enzymatic treatments on solid, protein and carbohydrate recovery / Primena pekarskog kvasca (Saccharomyces cerevisiae) za dobijanje kvaščevih ekstrakata - uticaj različitih parametara enzimske hidrolize na sadržaj suve materije, proteina i ugljenih hidrata
(Serbian Chemical Society, Belgrade, 2007)
Yeast extract (YE) was produced from commercial pressed baker's yeast (active and inactivated) using two enzymes: papain and lyticase. The effects of enzyme concentration and hydrolysis time on the recovery of solid, protein ...
Use of the SSF equations in the Kojima-Moon-Ochi thermodynamic consistency test of isothermal vapour-liquid equilibrium data
(Serbian Chemical Society, 2000)
The Kojima-Moon-Ochi (KMO) thermodynamic consistency test of vapour-liquid equilibrium (VLE) measurements for 32 isothermal data sets of binary systems of various complexity was applied using two fitting equations: the ...
Synthesis, structure and properties of thermoplastic poly(ester-siloxane) elastomers
(Serbian Chemical Society, 2006)
Two series of thermoplastic poly(ester-siloxane) elastomers (TPES), with hard segments based on poly(butylene terephthalate) (PBT) and soft segments based on poly(dimethylsiloxane) (PDMS), were synthesized by high-temperature, ...
The influence of antioxidant and post-synthetic treatment on the properties of biodegradable poly(butylene succinate)s modified with poly(propylene oxide) / Uticaj antioksiodansa i načina izdvajanja polimera na svojstva biodegradabilnih poli(butilen sukcinata) modifikovanih poli(propilenoksidom)
(Serbian Chemical Society, Belgrade, 2007)
Novel poly(ester-ether)s based on poly(butylene succinate) (PBS) as the hard segments and 30 mass % of poly(propylene oxide) (PPO) as the soft segments were synthesized with varying amount of the antioxidant (N,N'-diphen ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot–Lesage composite hardness model / ОДРЕЂИВАЊЕ АПСОЛУТНЕ ТВРДОЋЕ ЕЛЕКТРОЛИТИЧКИ ДОБИЈЕНИХ ПРЕВЛАКА БАКРА ПРИМЕНОМ CHICOT–LESAGE КОМПОЗИТНОГ МОДЕЛА ТВРДОЋЕ
(Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot––Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Modification of the aluminum for making offset printing plates
(Serbian Chemical Society, 2000)
Aluminum as the base of offset printing plates should make good contact with wetting agents and the light sensitive layer and should be resistant to wear and cracking. In order to achieve this, the aluminum is roughened ...
PMMA-Y2O3 (Eu3+) nanocomposites: Optical and mechanical properties / Nanokompozit PMMA-Y2O3 (Eu3+) - optička i mehanička svojstva
(Serbian Chemical Society, Belgrade, 2011)
The results of a study related to the processing and characterization of poly(methyl methacrylate) (PMMA)-Y2O3 (Eu3+) nanocomposites are presented herein. The nanocomposite samples were prepared using a laboratory mixing ...