Претраживање
Приказ резултата 1-10 од 23
The nano-wetting aspect at the liquid-metal/sic interface
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2015)
The wetting process on the nano-scale, as an initial and essential step in liquid metal/ceramic joining, is discussed here. Thanks to recent breakthroughs in experimental techniques with nanometre resolution, questions ...
Homogenization of an al-mg alloy and alligatoring failure: alloy ductility and fracture
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
High-strength Al-Mg alloys have a propensity toward hot fracture and failure by alligatoring during hot rolling. In this study the effect of homogenization conditions on the susceptibility of an Al-5.1Mg-0.7Mn alloy toward ...
Influence of the thermo-mechanical treatment on the exfoliation and pitting corrosion of an aa5083-type alloy
(Institute of Metals and Technology, 2014)
Exfoliation and pitting corrosion were tested on an AA5083-type alloy sheet, after applying different thermo-mechanical treatments. Hot-rolled plates were laboratory cold rolled with 16-54 % reductions, and subsequently ...
Influence of cold-rolling deformation and annealing temperature on the grain growth of al-4%mg-mn alloy
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2020)
The propensity of an alloy toward an abnormal grain growth (AGG) severely limits the annealing temperature range, capability for hot forming, and deteriorates mechanical properties. In this work, the results of a study of ...
Homogenization of an al-mg alloy and alligatoring failure: influence of the microstructure
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
In this study the influence of the microstructure of Al-5.1Mg-0.7Mn alloy on the propensity towards an alligatoring failure was evaluated. The morphology of the constituent particles appears to be the key factor, with ...
Mechanical and microstructural properties of the fly-ash-based geopolymer paste and mortar
(Institute of Metals and Technology, 2013)
In this paper we have investigated the influence of synthesis parameters on the mechanical properties of the fly-ash-based geopolymer paste and mortars. Moreover, the influence of an addition of limestone sand on the ...
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Geopolymerization of low-grade bauxite
(Institute of Metals and Technology, 2014)
In terms of quality, bauxite ore can be classified as high- or low-grade ore. High-grade bauxite ores are used for alumina extraction using the Bayer process, while low-grade bauxite ores have a limited application. In ...
Nanofoils for soldering and brazing in dental joining practice and jewellery manufacturing
(Institute of Metals and Technology, 2010)
This paper describes the development of novel, reactive Al-Au nano-multilayered foils, their possible application in different fields and a discussion of the nano-foils' suitability for dental and jewellery applications. ...
Optimization of the recycling processes for magnesium from a highly contaminated waste
(Institute of Metals and Technology, 2014)
With the recently increased use of magnesium alloys, especially in the automotive industry, a large quantity of generated waste, based on magnesium alloys, is expected. Such a waste often contains many impurities such as ...