Pretraživanje
Prikaz rezultata 1-10 od 38
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(Electrochemical Science Group, Beograd, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
The Application of a Natural Zeolite for Acid Mine Drainage Purification
(Japan Inst Metals & Materials, Sendai, 2015)
A natural zeolite from Serbia was employed for the removal of heavy metals from acid mine drainage (AMD) generated in the area of copper mine. The efficiency of the natural zeolite samples was tested on AMD that contained ...
Predicting the copper adsorption capacity on different zeolites / Predviđanje adsorpcionog kapaciteta bakra na različitim zeolitima
(University of Belgrade, Technical Faculty, Bor, 2017)
In this paper the ability of three natural zeolites from different localities (Vranjska banja-VB, Igroš-I and Baia Mare-BM deposits) to remove copper has been investigated. These three zeolites were subjected to the ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, Basel, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15-70 mAcm(-2), obtained by varying either the frequency (30, ...
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(International Journal of Electrochemical Science, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...
Hydrometallurgical process for extraction of metals from electronic waste, Part I: Material characterization and process option selection
(Savez inženjera metalurgije Srbije, Beograd, 2009)
Used electronic equipment became one of the fastest growing waste streams in the world. In the past two decades recycling of printed circuit boards (PCBs) has been based on pyrometallurgy, highly polluting recycling ...
Nanocomposite powders for new contact materials based on copper and alumina
(Association of the Chemical Engineers of Serbia, 2008)
This paper is a contribution to characterization of Cu-Al2O3 powders with nanostructure designed for the production of dispersion strengthened contact materials. New materials with predetermined properties can be successfully ...
100 years of Bor smelter factory, RTB Bor, Serbia / Sto godina Topionice bakra u Rudarsko-Topioničarskom Basenu Bor, Srbija
(Savez inženjera i tehničara Srbije, Beograd, 2008)
The break through moment in evolution of human community is discover of some metals. Developing mining and metallurgy in eastern Serbia was depended of developing The Bor mining and metallurgical complex (RTB Bor). The ...
Copper accumulation and availability in vineyard soils of Serbia / Akumulacija i dostupnost bakra u zemljištima vinograda u Srbiji
(Univerzitet u Nišu, Niš, 2006)
The focus of this work is to measure the accumulation and distribution of copper in vineyard soils in Serbia as a step towards understanding copper existence in soils and its potential for availability to flora and fauna. ...