Pretraživanje
Prikaz rezultata 1-7 od 7
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Removal of metal cations from wastewater using recycled wool-based non-woven material / Uklanjanje katjona metala iz otpadne vode netkanim materijalom na bazi vune kao sekundarne sirovine
(Serbian Chemical Society, Belgrade, 2007)
In this study, the effect of low-temperature air plasma, biopolymer chitosan and hydrogen peroxide treatment of recycled wool-based non-woven material on metal cation uptake was investigated. Recycled wool-based material ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition / Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
(Serbian Chemical Society, 2008)
The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 ...
Sintering of Cu-Al2O3 nano-composite powders produced by a thermochemical route / Sinterovanje nano-kompozitnih prahova Cu-Al2O3 dobijenih termohemijskih postupkom
(Serbian Chemical Society, Belgrade, 2007)
This paper presents the synthesis of nano-composite Cu-Al2O3 powder by a thermochemical method and sintering, with a comparative analysis of the mechanical and electrical properties of the obtained solid samples. ...
Overpotential controls the morphology of electrolytically produced copper dendritic forms / Пренапетост контролише морфологију електролитички произведених дендритичних форми бакра
(Belgrade : Serbian Chemical Society, 2019)
The morphologies of copper dendritic forms obtained in both potentiostatic and galvanostatic regimes of electrolysis with various amounts of the electricity were analyzed by the scanning electron microscopy (SEM) technique. ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...