Prikaz osnovnih podataka o dokumentu

Primena numeričkog modela za predviđanje savojnih svojstava staklo-epoksi kompozitnog materijala

dc.creatorStamenović, Marina
dc.creatorPutić, Slaviša
dc.creatorBajčeta, Branislav
dc.creatorVitković, Dragana
dc.date.accessioned2021-03-10T10:42:01Z
dc.date.available2021-03-10T10:42:01Z
dc.date.issued2007
dc.identifier.issn1450-7188
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/1070
dc.description.abstractMechanical properties of composite materials are conditioned by their structure and depend on the characteristics of structural components. In this paper is presented a numerical model by which the bending properties can be predicted on the basis of known mechanical properties of tension and pressure. Determining the relationship between these properties is justified having in mind the mechanics of fracture during bending, where the fracture takes place on the outer layer which is subjected to bending while the break ends on the layer subjected to pressure. The paper gives the values of tension, pressure and bending properties obtained by the corresponding mechanical test. A comparison of the numerical results of bending properties obtained on the basis of the model with the experimental ones, shows their satisfactory agreement. Therefore, this model can be used for some future research to predict bending properties without experiments.en
dc.description.abstractMehanička svojstva kompozitnih materijala su uslovljena njihovom strukturom i zavise od svojstava strukturnih komponenata. U ovom radu prikazan je numerički model kojim se na osnovu poznatih zateznih i pritisnih mehaničkih svojstava mogu odrediti savojna svojstva. Dovođenje u vezu ovih svojstava je opravdano imajući u vidu mehaniku loma pri savijanju, gde do loma uzorka dolazi sa strane spoljnjeg sloja koji je opterećen na zatezanje dok se lom završava na sloju opterećenom na pritisak. U radu su date i vrednosti zateznih, pritisnih i savojnih svojstava dobijene izvođenjem odgovarajućih eksperimentalnih mehaničkih ispitivanja. Poređenjem numeričkih rezultata savojnih svojstava dobijenih na osnovu modela sa eksperimentalno dobijenim rezultatima uočeno je njihovo zadovoljavajuće slaganje. Samim tim pokazano je da se ovaj model može koristiti u nekim budućim istraživanjima za približno određivanje savojnih svojstava bez izvođenja ispitivanja.sr
dc.publisherFaculty of Technology, Novi Sad
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceActa periodica technologica
dc.subjectanalytical modelen
dc.subjectglass-epoxy composite materialen
dc.subjecttension testen
dc.subjectcompression testen
dc.subjectbending propertiesen
dc.titleNumerical method for the prediction of bending properties of glass-epoxy compositesen
dc.titlePrimena numeričkog modela za predviđanje savojnih svojstava staklo-epoksi kompozitnog materijalasr
dc.typearticle
dc.rights.licenseBY-NC-ND
dc.citation.epage95
dc.citation.issue38
dc.citation.other(38): 85-95
dc.citation.spage85
dc.identifier.doi10.2298/APT0738085S
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/8580/1450-71880738085S.pdf
dc.identifier.scopus2-s2.0-38149116852
dc.type.versionpublishedVersion


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu