Structural evolution of nanostructured barium titanate thin film sol-gel derived
Само за регистроване кориснике
2008
Чланак у часопису (Објављена верзија)
![](/themes/MirageTechnoRep//images/creativecommons/arr.png)
Метаподаци
Приказ свих података о документуАпстракт
Ferroelectric nanostructured barium titanate (BT) thin films derived by a modified sol-gel process were formed by a deep coating method on Si (100) substrate. In this work was investigated the influence of different types and amounts of water (free water directly added in process and crystalline water from barium precursors) and of different barium precursors (hydroxide and acetate) on the gel-structure evolution and the barium titanate thin film crystallization. The IR-spectroscopy and X-ray diffraction analysis were used for sample characterization. Experimental results show that crystalline water from barium hydroxide octahydrate stabilizes the cubic phase of barium titanate. Barium titanate crystallizes in the tetragonal form in thin films when sols were prepared with free water and Ba-acetate or Ba-hydroxide monohydrate as precursors. The type of Ba-precursor used in preparation of sols effects the rate of crystallization of the BT in thin films, making it slower in the case when ...as precursor was used Ba-acetate than Ba-hydroxides. The prepared BT-thin films demonstrated good adhesion towards substrate and were smooth and uniform.
Кључне речи:
nanostructure / barium titanate / thin film / modified sol-gel route / tetragonalityИзвор:
Journal of Sol-Gel Science and Technology, 2008, 45, 2, 125-132Издавач:
- Springer, New York
Финансирање / пројекти:
- Синтеза, структура, својства и примена функционалних наноструктурних керамичких и биокерамичких материјала (RS-MESTD-MPN2006-2010-142070)
DOI: 10.1007/s10971-007-1664-1
ISSN: 0928-0707
WoS: 000252875100001
Scopus: 2-s2.0-38849117676
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Radonjić, L. AU - Todorović, M. AU - Miladinović, Jelena PY - 2008 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1259 AB - Ferroelectric nanostructured barium titanate (BT) thin films derived by a modified sol-gel process were formed by a deep coating method on Si (100) substrate. In this work was investigated the influence of different types and amounts of water (free water directly added in process and crystalline water from barium precursors) and of different barium precursors (hydroxide and acetate) on the gel-structure evolution and the barium titanate thin film crystallization. The IR-spectroscopy and X-ray diffraction analysis were used for sample characterization. Experimental results show that crystalline water from barium hydroxide octahydrate stabilizes the cubic phase of barium titanate. Barium titanate crystallizes in the tetragonal form in thin films when sols were prepared with free water and Ba-acetate or Ba-hydroxide monohydrate as precursors. The type of Ba-precursor used in preparation of sols effects the rate of crystallization of the BT in thin films, making it slower in the case when as precursor was used Ba-acetate than Ba-hydroxides. The prepared BT-thin films demonstrated good adhesion towards substrate and were smooth and uniform. PB - Springer, New York T2 - Journal of Sol-Gel Science and Technology T1 - Structural evolution of nanostructured barium titanate thin film sol-gel derived EP - 132 IS - 2 SP - 125 VL - 45 DO - 10.1007/s10971-007-1664-1 ER -
@article{ author = "Radonjić, L. and Todorović, M. and Miladinović, Jelena", year = "2008", abstract = "Ferroelectric nanostructured barium titanate (BT) thin films derived by a modified sol-gel process were formed by a deep coating method on Si (100) substrate. In this work was investigated the influence of different types and amounts of water (free water directly added in process and crystalline water from barium precursors) and of different barium precursors (hydroxide and acetate) on the gel-structure evolution and the barium titanate thin film crystallization. The IR-spectroscopy and X-ray diffraction analysis were used for sample characterization. Experimental results show that crystalline water from barium hydroxide octahydrate stabilizes the cubic phase of barium titanate. Barium titanate crystallizes in the tetragonal form in thin films when sols were prepared with free water and Ba-acetate or Ba-hydroxide monohydrate as precursors. The type of Ba-precursor used in preparation of sols effects the rate of crystallization of the BT in thin films, making it slower in the case when as precursor was used Ba-acetate than Ba-hydroxides. The prepared BT-thin films demonstrated good adhesion towards substrate and were smooth and uniform.", publisher = "Springer, New York", journal = "Journal of Sol-Gel Science and Technology", title = "Structural evolution of nanostructured barium titanate thin film sol-gel derived", pages = "132-125", number = "2", volume = "45", doi = "10.1007/s10971-007-1664-1" }
Radonjić, L., Todorović, M.,& Miladinović, J.. (2008). Structural evolution of nanostructured barium titanate thin film sol-gel derived. in Journal of Sol-Gel Science and Technology Springer, New York., 45(2), 125-132. https://doi.org/10.1007/s10971-007-1664-1
Radonjić L, Todorović M, Miladinović J. Structural evolution of nanostructured barium titanate thin film sol-gel derived. in Journal of Sol-Gel Science and Technology. 2008;45(2):125-132. doi:10.1007/s10971-007-1664-1 .
Radonjić, L., Todorović, M., Miladinović, Jelena, "Structural evolution of nanostructured barium titanate thin film sol-gel derived" in Journal of Sol-Gel Science and Technology, 45, no. 2 (2008):125-132, https://doi.org/10.1007/s10971-007-1664-1 . .