Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology
Само за регистроване кориснике
2009
Аутори
Jovanović, Z.Bajat, Jelena

Jančić-Heinemann, Radmila

Dimitrijević, M.
Mišković-Stanković, Vesna

Чланак у часопису (Објављена верзија)

Метаподаци
Приказ свих података о документуАпстракт
The electrochemical characteristics, adhesion and morphology of methacryloxypropyltrimethoxysilane (MAPT) films on aluminium were investigated during exposure to 3 wt.% NaCl. The MAPT films were deposited on aluminium surface from 2 to 5 vol.% methacryloxypropyltrimethoxysilane solutions, with the aim to investigate the influence of deposition parameters (silane solution concentration and curing time) on electrochemical characteristics, adhesion and morphology of MAPT films on aluminium. Using electrochemical impedance spectroscopy (EIS), potential-time measurements, adhesion measurements and optical microscopy coupled with image analysis, it was shown that films deposited from 5 vol.% solution exhibited better corrosion stability and adhesion, as well as lower porosity comparing to 2 vol.% solution and improved the corrosion protection of aluminium substrate, while the curing time had no influence on these characteristics.
Кључне речи:
Methacryloxypropyltrimethoxysilane / Corrosion / Electrochemical impedance spectroscopy / Adhesion / Image analysisИзвор:
Progress in Organic Coatings, 2009, 66, 4, 393-399Издавач:
- Elsevier Science Sa, Lausanne
Финансирање / пројекти:
- Ministry of Science and Technological Development
- Електрохемијске карактеристике оксидних и полимерних превлака на модификованим површинама метала (RS-142061)
DOI: 10.1016/j.porgcoat.2009.09.002
ISSN: 0300-9440
WoS: 000271849400008
Scopus: 2-s2.0-70350218807
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Jovanović, Z. AU - Bajat, Jelena AU - Jančić-Heinemann, Radmila AU - Dimitrijević, M. AU - Mišković-Stanković, Vesna PY - 2009 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1469 AB - The electrochemical characteristics, adhesion and morphology of methacryloxypropyltrimethoxysilane (MAPT) films on aluminium were investigated during exposure to 3 wt.% NaCl. The MAPT films were deposited on aluminium surface from 2 to 5 vol.% methacryloxypropyltrimethoxysilane solutions, with the aim to investigate the influence of deposition parameters (silane solution concentration and curing time) on electrochemical characteristics, adhesion and morphology of MAPT films on aluminium. Using electrochemical impedance spectroscopy (EIS), potential-time measurements, adhesion measurements and optical microscopy coupled with image analysis, it was shown that films deposited from 5 vol.% solution exhibited better corrosion stability and adhesion, as well as lower porosity comparing to 2 vol.% solution and improved the corrosion protection of aluminium substrate, while the curing time had no influence on these characteristics. PB - Elsevier Science Sa, Lausanne T2 - Progress in Organic Coatings T1 - Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology EP - 399 IS - 4 SP - 393 VL - 66 DO - 10.1016/j.porgcoat.2009.09.002 ER -
@article{ author = "Jovanović, Z. and Bajat, Jelena and Jančić-Heinemann, Radmila and Dimitrijević, M. and Mišković-Stanković, Vesna", year = "2009", abstract = "The electrochemical characteristics, adhesion and morphology of methacryloxypropyltrimethoxysilane (MAPT) films on aluminium were investigated during exposure to 3 wt.% NaCl. The MAPT films were deposited on aluminium surface from 2 to 5 vol.% methacryloxypropyltrimethoxysilane solutions, with the aim to investigate the influence of deposition parameters (silane solution concentration and curing time) on electrochemical characteristics, adhesion and morphology of MAPT films on aluminium. Using electrochemical impedance spectroscopy (EIS), potential-time measurements, adhesion measurements and optical microscopy coupled with image analysis, it was shown that films deposited from 5 vol.% solution exhibited better corrosion stability and adhesion, as well as lower porosity comparing to 2 vol.% solution and improved the corrosion protection of aluminium substrate, while the curing time had no influence on these characteristics.", publisher = "Elsevier Science Sa, Lausanne", journal = "Progress in Organic Coatings", title = "Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology", pages = "399-393", number = "4", volume = "66", doi = "10.1016/j.porgcoat.2009.09.002" }
Jovanović, Z., Bajat, J., Jančić-Heinemann, R., Dimitrijević, M.,& Mišković-Stanković, V.. (2009). Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology. in Progress in Organic Coatings Elsevier Science Sa, Lausanne., 66(4), 393-399. https://doi.org/10.1016/j.porgcoat.2009.09.002
Jovanović Z, Bajat J, Jančić-Heinemann R, Dimitrijević M, Mišković-Stanković V. Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology. in Progress in Organic Coatings. 2009;66(4):393-399. doi:10.1016/j.porgcoat.2009.09.002 .
Jovanović, Z., Bajat, Jelena, Jančić-Heinemann, Radmila, Dimitrijević, M., Mišković-Stanković, Vesna, "Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology" in Progress in Organic Coatings, 66, no. 4 (2009):393-399, https://doi.org/10.1016/j.porgcoat.2009.09.002 . .