Приказ основних података о документу

dc.creatorTsui, C. P.
dc.creatorTang, C. Y.
dc.creatorGuo, Y. Q.
dc.creatorUskoković, Petar
dc.creatorFan, Jian-Ping
dc.creatorGao, B.
dc.date.accessioned2021-03-10T11:17:27Z
dc.date.available2021-03-10T11:17:27Z
dc.date.issued2010
dc.identifier.issn0927-6440
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/1615
dc.description.abstractThe mechanical properties of hydroxyapatite related macroporous biocomposites (MPBs) are influenced by a number of factors, such as the pore size, the filler content and the properties of the matrix and the inclusion. Failure often occurs when the strength of the implant cannot bear the applied mechanical load. In this study, the effects of filler content on the mechanical properties of MPBs have been investigated. A finite element (FE) unit cell model of a macroporous hydroxyapatite-polyetheretherketone (HA-PEEK) biocomposite structure with uniform and interconnected pores has been constructed. In the FE model, the HA particles were assumed to have random distribution, and particle volume fraction would be varied in the PEEK matrix. The material behaviours of both HA and PEEK have been implemented in the ABAQUS finite element code. HA was modelled to exhibit elastic behaviour and undergo plastic softening to a residual strength when a critical stress was reached, while the PEEK matrix would follow elastic-plastic behaviour. The macroscopic compressive stress-strain relations of the macroporous biocomposite structures have been predicted. Increasing particle volume fraction could lead to an increase in the compressive elastic modulus of the structures but a reduction in the compressive strength. The von Mises stress distribution and the effect of stress concentration in the structures with different filler content are also discussed. The proposed model could provide macro-structural and microscopic information of the macroporous biocomposite structure to the designers in order to facilitate the fabrication of this kind of structure with optimum mechanical properties.en
dc.publisherVsp Bv, Leiden
dc.relationResearch Grants Council of the Hong Kong Special Administrative Region, ChinaHong Kong Research Grants Council [PolyU 5273/07E]
dc.rightsrestrictedAccess
dc.sourceComposite Interfaces
dc.subjectMacroporous biocompositesen
dc.subjectfiller contenten
dc.subjectunit cell modelen
dc.subjectfinite element methoden
dc.titleEffects of Filler Content on Mechanical Properties of Macroporous Compositesen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage579
dc.citation.issue5-7
dc.citation.other17(5-7): 571-579
dc.citation.rankM22
dc.citation.spage571
dc.citation.volume17
dc.identifier.doi10.1163/092764410X513440
dc.identifier.scopus2-s2.0-77955719583
dc.identifier.wos000282662500014
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу