A removal of Cu2+ ions from aqueous solutions onto hydrogels of chitosan. itaconic and methacrylic acid has been investigated using batch adsorption technique. The extent of adsorption was investigated as a function of pH, adsorbent dose, initial metal ion concentration, contact time and temperature. The FIR spectra showed that -NH2, -OH and -COOH groups are involved in the Cu2+ ions adsorption. The surface topography changes were observed by AFM, where the phase images indicated that sorption takes place on the surface of the hydrogel and in the bulk. Pseudo-first order, pseudo-second order and intraparticle diffusion models were analyzed and showed that the Cu2+ ions adsorption followed pseudo-second order kinetics. The equilibrium data were analyzed using Langmuir, Freundlich and Redlich-Peterson isotherms and the best interpretation was given by Redlich-Peterson. The adsorption capacity was found to be 122.59 mg/g, based on the non-linear Langmuir isotherm. Based on the separation ...factor. R-L, the Cu2+ ion adsorption is favorable, while the low activation energies indicate physisorption. Desorption experiments, done with a nitric acid, showed that the investigated hydrogels could be reused without significant losses of the initial properties even after three adsorption-sorption cycles.
TY - JOUR
AU - Milosavljević, Nedeljko
AU - Ristić, Mirjana
AU - Perić-Grujić, Aleksandra
AU - Filipović, Jovanka M.
AU - Štrbac, Svetlana
AU - Rakočević, Zlatko Lj.
AU - Kalagasidis Krušić, Melina
PY - 2011
UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1860
AB - A removal of Cu2+ ions from aqueous solutions onto hydrogels of chitosan. itaconic and methacrylic acid has been investigated using batch adsorption technique. The extent of adsorption was investigated as a function of pH, adsorbent dose, initial metal ion concentration, contact time and temperature. The FIR spectra showed that -NH2, -OH and -COOH groups are involved in the Cu2+ ions adsorption. The surface topography changes were observed by AFM, where the phase images indicated that sorption takes place on the surface of the hydrogel and in the bulk. Pseudo-first order, pseudo-second order and intraparticle diffusion models were analyzed and showed that the Cu2+ ions adsorption followed pseudo-second order kinetics. The equilibrium data were analyzed using Langmuir, Freundlich and Redlich-Peterson isotherms and the best interpretation was given by Redlich-Peterson. The adsorption capacity was found to be 122.59 mg/g, based on the non-linear Langmuir isotherm. Based on the separation factor. R-L, the Cu2+ ion adsorption is favorable, while the low activation energies indicate physisorption. Desorption experiments, done with a nitric acid, showed that the investigated hydrogels could be reused without significant losses of the initial properties even after three adsorption-sorption cycles.
PB - Elsevier Science Bv, Amsterdam
T2 - Colloids and Surfaces A-Physicochemical and Engineering Aspects
T1 - Removal of Cu2+ ions using hydrogels of chitosan, itaconic and methacrylic acid: FTIR, SEM/EDX, AFM, kinetic and equilibrium study
EP - 69
IS - 1-3
SP - 59
VL - 388
DO - 10.1016/j.colsurfa.2011.08.011
ER -
@article{
author = "Milosavljević, Nedeljko and Ristić, Mirjana and Perić-Grujić, Aleksandra and Filipović, Jovanka M. and Štrbac, Svetlana and Rakočević, Zlatko Lj. and Kalagasidis Krušić, Melina",
year = "2011",
abstract = "A removal of Cu2+ ions from aqueous solutions onto hydrogels of chitosan. itaconic and methacrylic acid has been investigated using batch adsorption technique. The extent of adsorption was investigated as a function of pH, adsorbent dose, initial metal ion concentration, contact time and temperature. The FIR spectra showed that -NH2, -OH and -COOH groups are involved in the Cu2+ ions adsorption. The surface topography changes were observed by AFM, where the phase images indicated that sorption takes place on the surface of the hydrogel and in the bulk. Pseudo-first order, pseudo-second order and intraparticle diffusion models were analyzed and showed that the Cu2+ ions adsorption followed pseudo-second order kinetics. The equilibrium data were analyzed using Langmuir, Freundlich and Redlich-Peterson isotherms and the best interpretation was given by Redlich-Peterson. The adsorption capacity was found to be 122.59 mg/g, based on the non-linear Langmuir isotherm. Based on the separation factor. R-L, the Cu2+ ion adsorption is favorable, while the low activation energies indicate physisorption. Desorption experiments, done with a nitric acid, showed that the investigated hydrogels could be reused without significant losses of the initial properties even after three adsorption-sorption cycles.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Colloids and Surfaces A-Physicochemical and Engineering Aspects",
title = "Removal of Cu2+ ions using hydrogels of chitosan, itaconic and methacrylic acid: FTIR, SEM/EDX, AFM, kinetic and equilibrium study",
pages = "69-59",
number = "1-3",
volume = "388",
doi = "10.1016/j.colsurfa.2011.08.011"
}
Milosavljević, N., Ristić, M., Perić-Grujić, A., Filipović, J. M., Štrbac, S., Rakočević, Z. Lj.,& Kalagasidis Krušić, M.. (2011). Removal of Cu2+ ions using hydrogels of chitosan, itaconic and methacrylic acid: FTIR, SEM/EDX, AFM, kinetic and equilibrium study. in Colloids and Surfaces A-Physicochemical and Engineering Aspects
Elsevier Science Bv, Amsterdam., 388(1-3), 59-69.
https://doi.org/10.1016/j.colsurfa.2011.08.011
Milosavljević N, Ristić M, Perić-Grujić A, Filipović JM, Štrbac S, Rakočević ZL, Kalagasidis Krušić M. Removal of Cu2+ ions using hydrogels of chitosan, itaconic and methacrylic acid: FTIR, SEM/EDX, AFM, kinetic and equilibrium study. in Colloids and Surfaces A-Physicochemical and Engineering Aspects. 2011;388(1-3):59-69.
doi:10.1016/j.colsurfa.2011.08.011 .
Milosavljević, Nedeljko, Ristić, Mirjana, Perić-Grujić, Aleksandra, Filipović, Jovanka M., Štrbac, Svetlana, Rakočević, Zlatko Lj., Kalagasidis Krušić, Melina, "Removal of Cu2+ ions using hydrogels of chitosan, itaconic and methacrylic acid: FTIR, SEM/EDX, AFM, kinetic and equilibrium study" in Colloids and Surfaces A-Physicochemical and Engineering Aspects, 388, no. 1-3 (2011):59-69,
https://doi.org/10.1016/j.colsurfa.2011.08.011 . .
