The effect of heat treatment on the microstructure and corrosion behaviour of Zn27Al1 5CuO 02Mg alloy was examined The alloy was prepared by melting and casting route and then thermally processed (T4 regime) Corrosion behaviour of the as-cast and heat treated alloy was studied in 3 5 wt % NaCl solution using immersion method and electrochemical polarization measurements The applied heat treatment affected the alloy microstructure and resulted in increased ductility and higher corrosion resistance of the heat treated alloy Electrochemical measurements of the corrosion rate at the free corrosion potential are in agreement with the results obtained using the weight loss method 2010 Elsevier Ltd All rights reserved
Ključne reči:
Zinc / Alloy / Weight loss / Polarization / SEM
Izvor:
Corrosion Science, 2011, 53, 1, 409-417
Izdavač:
Pergamon-Elsevier Science Ltd, Oxford
Finansiranje / projekti:
Ministry of Sciences and Environmental Protection of the Republic of Serbia [TR 19061, TR 14005B]
TY - JOUR
AU - Bobić, Biljana
AU - Bajat, Jelena
AU - Aćimović-Pavlović, Zagorka
AU - Rakin, Marko
AU - Bobić, Ilija
PY - 2011
UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1925
AB - The effect of heat treatment on the microstructure and corrosion behaviour of Zn27Al1 5CuO 02Mg alloy was examined The alloy was prepared by melting and casting route and then thermally processed (T4 regime) Corrosion behaviour of the as-cast and heat treated alloy was studied in 3 5 wt % NaCl solution using immersion method and electrochemical polarization measurements The applied heat treatment affected the alloy microstructure and resulted in increased ductility and higher corrosion resistance of the heat treated alloy Electrochemical measurements of the corrosion rate at the free corrosion potential are in agreement with the results obtained using the weight loss method 2010 Elsevier Ltd All rights reserved
PB - Pergamon-Elsevier Science Ltd, Oxford
T2 - Corrosion Science
T1 - The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy
EP - 417
IS - 1
SP - 409
VL - 53
DO - 10.1016/j.corsci.2010.09.051
ER -
@article{
author = "Bobić, Biljana and Bajat, Jelena and Aćimović-Pavlović, Zagorka and Rakin, Marko and Bobić, Ilija",
year = "2011",
abstract = "The effect of heat treatment on the microstructure and corrosion behaviour of Zn27Al1 5CuO 02Mg alloy was examined The alloy was prepared by melting and casting route and then thermally processed (T4 regime) Corrosion behaviour of the as-cast and heat treated alloy was studied in 3 5 wt % NaCl solution using immersion method and electrochemical polarization measurements The applied heat treatment affected the alloy microstructure and resulted in increased ductility and higher corrosion resistance of the heat treated alloy Electrochemical measurements of the corrosion rate at the free corrosion potential are in agreement with the results obtained using the weight loss method 2010 Elsevier Ltd All rights reserved",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Corrosion Science",
title = "The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy",
pages = "417-409",
number = "1",
volume = "53",
doi = "10.1016/j.corsci.2010.09.051"
}
Bobić, B., Bajat, J., Aćimović-Pavlović, Z., Rakin, M.,& Bobić, I.. (2011). The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy. in Corrosion Science
Pergamon-Elsevier Science Ltd, Oxford., 53(1), 409-417.
https://doi.org/10.1016/j.corsci.2010.09.051
Bobić B, Bajat J, Aćimović-Pavlović Z, Rakin M, Bobić I. The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy. in Corrosion Science. 2011;53(1):409-417.
doi:10.1016/j.corsci.2010.09.051 .
Bobić, Biljana, Bajat, Jelena, Aćimović-Pavlović, Zagorka, Rakin, Marko, Bobić, Ilija, "The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy" in Corrosion Science, 53, no. 1 (2011):409-417,
https://doi.org/10.1016/j.corsci.2010.09.051 . .
