Pretraživanje
Prikaz rezultata 1541-1550 od 1558
Erratum: Effect of temperature on the excess molar volumes of some alcohol + aromatic mixtures and modelling by cubic EOS mixing rules (Fluid Phase Equilibria (2006) 239 (69-82) DOI: 10.1016/j.fluid.2005.10.022)
(Elsevier, 2006)
In Table 2 of the original paper, several typographical errors have occurred in the density and excess molar volume values. In the table below the correct values of ρ and VE are given. It should be mentioned that all ...
Prediction of ductile fracture initiation using micromechanical analysis
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
In the paper ductile fracture initiation analysis of low-alloyed ferritic steel has been made by application of two micromechanical models: the Rice-Tracey void growth model and the Gurson-Tvergaard-Needleman (GTN) model. ...
Kinetics of the hydrogen evolution reaction on Fe-Mo film deposited on mild steel support in alkaline solution
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The mechanism and kinetics of the hydrogen evolution reaction were studied. in 1.0 mol dm(-3) NaOH solution on Fe-Mo alloy electrodes prepared by electrodeposition at constant current densities from a pyrophosphate bath. ...
The effect of reversing current deposition on the apparent density of electrolytic copper powder / Uticaj reversne struje na nasipnu masu pri elektrolitičkom taloženju bakarnog praha
(Serbian Chemical Society, 2002)
The possibility of depositing copper powders with different apparent density by changing the shape of reversing current wave is shown. The morphology and crystallinity of powder particles can be varied considerably by ...
Influence of plying on singles hemp yarn properties / Uticaj končanja na svojstva pređa od konoplje
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2002)
The return to garments that provide the maximum of natural properties became a new trend contributing significantly to environmental protection. In this situation hemp as a historical and controversial fiber gained the new ...
Comparative estimation of some comfort properties of agrocellulosic and man-made fiber knits / Poređenje nekih faktora konfora pletenina na bazi agroceluloznih i hemijskih vlakana
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2003)
An account is given of comparative compassioned behavior of agrocellulosic and chemical fibers (РaС) based knitted fabrics. The results obtained underline the importance of twist level in component yarns of knits and the ...
Analysis of polycyclic aromatic hydrocarbons (PAHs) in soil by soft independent modeling of class analogy (SIMCA)
(Serbian Chemical Society, 2003)
Ultraviolet Protection Factor of Gray-state Plain Cotton Knitted Fabrics
(Sage Publications Ltd, London, 2009)
The protection provided by clothing against ultraviolet (UV) radiation has been the subject of considerable recent research. However, a lack of investigations concerned with the influence of yarn properties on UV protection ...
Low-temperature tension properties of glass-epoxy composite materials / Određivanje zateznih svojstava staklo-epoksi kompozitnih materijala na niskim temperaturama
(Faculty of Technology, Novi Sad, 2005)
The aim of this paper was to present the determination of tensile strength Rm and modulus of elasticity Et of glass-epoxy composites at two different temperatures (at room temperature t=20°C, and at t =-50°C). Standard ...
Crack tip strain on ship and in situ measurement in shipyards
(IFAC Proceedings Volumes (IFAC-PapersOnline), 2007)
The paper presents the application extent of procedures for measurement deformations on ships. The actual deformation distribution was measured on the surface of the specimen by the optical grating method (OGM) parallel ...