Претраживање
Приказ резултата 11-16 од 16
Corrosion stability of polyester coatings on steel pretreated with different iron-phosphate coatings
(Elsevier Science Sa, Lausanne, 2011)
The influence of steel surface pretreatment with different types of iron-phosphate coatings on the corrosion stability and adhesion characteristics of polyester coatings on steel was investigated. The phosphate coating was ...
Electrochemical synthesis and characterization of polyaniline thin film and polyaniline powder
(Elsevier Science Sa, Lausanne, 2011)
The polyaniline thin film electrode and powder have been synthesized on graphite electrodes from 0.5 M hydrochloric acid solution under galvanostatic conditions. The water insoluble and acetone soluble polyaniline mass ...
The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium
(Elsevier Science Sa, Lausanne, 2012)
Composite coatings based on lignin, obtained by electrophoretic deposition (EPD) on titanium, were investigated. The aim of this work was to produce hydroxyapatite/lignin (HAP/Lig) coatings on titanium and to investigate ...
The influence of Ce-based coatings as pretreatments on corrosion stability of top powder polyester coating on AA6060
(Elsevier Science Sa, Lausanne, 2013)
Cerium-based conversion coatings (CeCCs) are one of the most prospective alternatives to the widely used chromate conversion coatings (CCCs) due to their anticorrosion efficiency, environmentally friendly nature and low ...
The use of nanoclay in preparation of epoxy anticorrosive coatings
(Elsevier Science Sa, Lausanne, 2014)
Epoxy/clay nanocomposites (NC) have become a very interesting topic among researchers in the past two decades because nanoclays have a positive effect on the mechanical, thermal and especially barrier and anticorrosive ...
Transparent PMMA/silica nanocomposites containing silica nanoparticles coating under supercritical conditions
(Elsevier Science Sa, Lausanne, 2013)
This work reports the preparation of PMMA/silica nanocomposites with high optical transparency and enhanced mechanical properties using a melt compounding method. The surface of SiO2 particles was modified with a ...