Pretraživanje
Prikaz rezultata 1-10 od 146
Nanostructured intrinsically conducting polymers formed by electrochemical synthesis / Nanostruktuirani elektroprovodni polimeri dobijeni elektrohemijskom sintezom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Due to unique properties of intrinsically conducting polymers (ICP) such as: electrical conductivity, reversible electrochemistry, optical activity, biocompatibility, environmental and corrosion stability, they still ...
Hydrometallurgical process for extraction of metals from electronic waste, part II: Development of the processes for the recovery of copper from printed circuit boards (PCB)
(Savez inženjera metalurgije Srbije, Beograd, 2011)
Rapid technological development induces increase of generation of used electric and electronic equipment waste, causing a serious threat to the environment. Waste printed circuit boards (WPCBs), as the main component of ...
Impact of roughness of Zn-Mn coatings on corrosive stability / Uticaj hrapavosti Zn-Mn prevlaka na korozionu postojanost
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
This paper involves electrochemical deposition of Zn-Mn coatings from four solutions. We measured their roughness and corrosion stability. We used cathodes made of steel of unknown composition that were licensed under the ...
Innovative and generic pharmaceuticals industry and drugs market / Inovativna i generička farmaceutska industrija i tržište lekova
(Economics institute, Belgrade, 2010)
The pharmaceutical industry consists of two sectors: the innovative sector and generic sector. The innovative pharmaceutical industry is totally dependent on patents and these companies are focused on protecting against ...
Possibility of secondary lead slag stabilization in concrete with presence of selected additives
(Savez inženjera metalurgije Srbije, Beograd, 2010)
A comparative technical and environmental evaluation of products arising from the stabilization/solidification of secondary lead metallurgical slag into a cement matrix was performed. Provided samples of an industrial slag ...
Effect of heating rate on precipitation of peak-aged Al-Li (8091) alloy: A quantitative approach
(Savez inženjera metalurgije Srbije, Beograd, 2010)
Samples of Al-Li (8091) alloy were solution treated at 540ºC for 30 min, water-quenched and continuously heated in oil at 0.05 and 0.1ºC/min rates, from room temperature to 190ºC when the peak hardness was achieved. Having ...
Vrednovanje intelektualne svojine
(Economics institute, Belgrade, 2011)
Intellectual Property Rights (IPRs) and Intangible Assets (IAs) can be highly valuable playing a key role in many fields of business, touching nearly all aspects of a company: products development, human capital, marketing ...
Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition
(Savez inženjera metalurgije Srbije, Beograd, 2011)
Magnetic thin films based on iron group elements (Fe, Co, Ni) are currently used in computer's hard disk drives and in MEMS, whereas electrodeposition is a suitable method to obtain these materials. The powders of metals ...
The analysis of the tribological properties of multiple strengthened nanocomposite of the Cu-Al2o3 system
(Savez inženjera metalurgije Srbije, Beograd, 2011)
This paper presents the results of examined tribological properties of the multiple strengthened nanocomposite Cu-Al2O3 system. Cu-Al2O3 composite powder was obtained by combination of the thermo-chemical procedure and ...
Modern steels: Transformation induced plasticity / Savremeni čelici - transformacijom izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2011)
TRIP čelici danas zauzimaju značajno mesto u komercijaloj upotrebi u vozilima i konstrukcijama kod kojih je jedan od glavnih zahteva redukcija sopstvene težine. Optimalna kombinacija udela stabilisanog austenita i stepen ...