Претраживање
Приказ резултата 31-40 од 176
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
Significance of cracks in the heat-affected-zone of steels for elevated temperature application / Značaj prslina u zoni uticaja toplote čelika za povišene temperature
(Society for Structural Integrity and Life, Institute for Material Testing, 2008)
Damage and failure of welded joints are classified according to the crack position. Type IV cracking occurs in welded joints in creep-resistant steels, due to enhanced rate of creep void formation in the presence of coarse ...
Sorption of Pb2+, Cd2+, and Sr2+ ions on calcium hydroxyapatite powder obtained by the hydrothermal method
(Asce-Amer Soc Civil Engineers, Reston, 2008)
The sorption of Pb2+, Cd2+, and Sr2+ ions from aqueous solutions by carbonate-substituted calcium hydroxyapatite (HAP) obtained by the hydrothermal decomposition of urea and calcium-ethylenediaminetetraacetic acid chelates ...
Efficiency of recycled wool-based nonwoven material for the removal of oils from water
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The aim of this study was to highlight the potential use of recycled wool-based nonwoven material for the removal of diesel fuel, crude, base, vegetable and motor oil from water. Sorption capacity of the material in water ...
Hysteretic behavior modeling of elastoplastic materials / Modeliranje histerezisnog ponašanja elastoplastičnih materijala
(Serbian Society of Mechanics & Mathematical Institute of the Serbian Academy of Sciences and Arts, Belgrade, 2008)
In the present paper the Preisach model of hysteresis is applied to model cyclic behavior of elasto-plastic material. Rate of loading and viscous effects will not be considered. The problem of axial loading of rectangular ...
The electrochemical behavior of erythromycin A on a gold electrode
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The reactivity of erythromycin (pure) was investigated on a gold electrode in neutral electrolyte by cyclic voltammetry. The resulting structural changes were observed with HPLC and FTIR spectroscopy by analyzing the bulk ...
Thermal shock behavior of alumina based refractories: Comparison with the mechanical data and thermal stability behavior prediction
(Belgian Ceramic Soc, Mons, 2008)
The thermal shock behavior of a large grain size alumina based refractories were investigated both experimentally, using standard procedure of water quench test and using mathematical calculation method for determining the ...
Lipase catalyzed synthesis of flavor esters in non-aqueous media: Optimization of the yield of pentyl 2-methylpropanoate by statistical analysis / Sinteza mirisnih estara katalizovana lipazama u nevodenoj sredini - optimizacija prinosa pentil-2-metilpropanoata statističkom analizom
(Serbian Chemical Society, Belgrade, 2008)
In this study, the synthesis of pentyl 2-methylpropanoate employing a commercial lipase from Candida rugosa was investigated, the emphasis being placed on analyzing the effects of various process conditions on the yield ...
Immobilization of lipase on sepabeads and its application in pentyl octanoate synthesis in a low aqueous system / Imobilizacija lipaze na komercijalni epoksidni nosač za sintezu pentil-oktanoata u mikrovodenom sistemu
(Faculty of Technology, Novi Sad, 2008)
The object of the study was to investigate the process conditions relevant for the pentyl octanoate production with the lipase from Candida rugosa immobilized on Sepabeads EC-EP carrier. This is an epoxide-containing ...
Double-layer bioactive glass coatings obtained by pulsed laser deposition
(Trans Tech Publications Ltd, Durnten-Zurich, 2008)
Pulsed laser deposition was used to obtain functionally graded bioactive glass coatings on titanium substrates. An UV KrF* (lambda=248 nm, tau gt 7 ns) excimer laser was used for the multi-pulse irradiation of the targets. ...