Претраживање
Приказ резултата 181-190 од 217
Micromechanical model for fracture toughness prediction in Al-Zn-Mg-Cu alloy forgings
(Taylor & Francis Ltd, Abingdon, 2008)
An attempt has been made to model the plane-strain fracture toughness, KIc, in Al-Zn-Mg-Cu alloy forgings subjected to overageing. The proposed model, based on the multiple micromechanisms, reveals the quantitative relations ...
Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives
(Elsevier, 2002)
Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were ...
Leaching of copper(I) sulphide by sulphuric acid solution with addition of sodium nitrate
(Elsevier, Amsterdam, 2003)
Finely grained samples of copper(I) sulphide were leached by H2SO4 solution with added NaNO3. The occurrence probability of chemical reactions was analysed based on literature data and products which were formed during the ...
Carbon cryogel as support of platinum nano-sized electrocatalyst for the hydrogen oxidation reaction
(Electrochimica Acta, 2006)
The kinetics of hydrogen oxidation reaction was studied in perchloric acid solution on carbon-supported Pt nanoparticles using the rotating disk electrode technique. Carbon cryogel and commercial carbon black. Vulcan XC-72 ...
Chitosan contribution on wool treatments with enzyme
(Elsevier Ltd., 2008)
In a previous research work, it was observed that the application of biopolymer chitosan (CHT) on wool fabrics before the enzymatic treatment promotes an increase of the weight loss. In order to deep on the role played by ...
Prediction of the choking velocity and voidage in vertical pneumatic conveying of coarse particles
(Elsevier, 2006)
A method for predicting the choking velocity and voidage in vertical pneumatic conveying of coarse particles is developed and verified using the data obtained in this study as well as the data of Capes and Nakamura [C.E. ...
Influence of ionic equilibrium in the CuSO(4)-H(2)SO(4)-H(2)O system on the formation of irregular electrodeposits of copper
(Oxford : Pergamon-Elsevier Science Ltd, 2008)
The relative concentration of hydrogen ion (H(+)) as a function of sulfuric acid (H(2)SO(4)) concentration (calculated using Pitzer's model) and the electrochemical processes by which irregular copper deposits are formed ...
Manganese leaching in the FeS2-MnO2-O2-H2O system at high temperature in an autoclave
(Elsevier Science Publishers B.V., 2000)
The paper shows: (a) the results of pyrite oxidation by gaseous oxygen in water suspension at high temperatures in an autoclave and (b) the results of simultaneous leaching of Mn4+ from pyrolusite ore by H2SO4 and FeSO4, ...
High activity of Pt4Mo alloy for the electrochemical oxidation of formic acid
(Amer Chemical Soc, Washington, 2007)
Surface processes on Pt4Mo alloy well-defined by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) were studied in acid solution by cyclic voltammetry. It was established that Mo in the alloy is much more ...
Comparative study of cu(2+) adsorption on a zeolite, a clay and a diatomite from Serbia
(Applied Clay Science, 2009)
The adsorption of a zeolite, clay and diatomite from Serbia toward aqueous Cu2+ ions was studied, at different pH. The adsorbents were characterized with respect to phase composition, specific surface area and point of ...