Претраживање
Приказ резултата 11-20 од 883
Influence of cubic alpha-Fe2O3 particles on the thermal stability of poly(methyl methacrylate) synthesized by in situ bulk polymerization
(Elsevier Sci Ltd, Oxford, 2009)
Poly(methyl methacrylate)/alpha-Fe2O3 Composites were prepared by in situ bulk radical polymerization of methyl methacrylate in the presence of the cubic alpha-Fe2O3 particles using 2,2'-azobisisobutyronitrile as initiator. ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Some Properties of Antimicrobial Coated Knitted Textile Material Evaluation
(Sage Publications Ltd, London, 2010)
The aim of this work was to investigate the antimicrobial activity of knitted fabric intended for medical purposes as well as the influence of antimicrobial treatment on the compression work, volume resistivity, water ...
Microwave sintering of fine grained HAP and HAP/TCP bioceramics
(Elsevier Sci Ltd, Oxford, 2010)
The effect of microwave sintering conditions on the microstructure, phase composition and mechanical properties of materials based on hydroxyapatite (HAP) and tricalcium phosphate (TCP) was investigated. Fine grained ...
The influence of tin and silver as microstructure modifiers on the corrosion rate of Pb-Ca alloys in sulfuric acid solutions
(Wiley-VCH Verlag Gmbh, Weinheim, 2010)
The effect of microstructure modifiers, Sn and Ag, on the corrosion rate of commercial Pb-Ca alloy in H(2)SO(4) electrolyte was investigated by the potentiodynamic polarization and by the weight loss corrosion rate measurement ...
Corrosion stability of Zn-Co alloys deposited from baths with high and low Co content - The influence of deposition current density
(Elsevier Science Sa, Lausanne, 2010)
Electrochemically deposited Zn-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy (AAS) for determination of chemical composition, anodic linear sweep voltammetry (ALSV) ...
Chitosan, itaconic acid and poly(vinyl alcohol) hybrid polymer networks of high degree of swelling and good mechanical strength
(Wiley, Hoboken, 2010)
Chitosan is a biodegradable, non-toxic, biocompatible polymer convenient for use in drug delivery. In this study, hybrid polymeric networks (HPNs) based on chitosan, itaconic acid and poly(vinyl alcohol) (PVA) were prepared ...
Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution
(Elsevier Science Sa, Lausanne, 2006)
Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements ...
High temporal and inter-individual variation detected in the human ileal microbiota
(Wiley, Hoboken, 2010)
P gt The diversity and temporal stability of the predominant bacteria in the human ileum was studied with the use of ileal effluent samples of seven individuals with Brooke ileostomies. The total number of bacteria within ...