Претраживање
Приказ резултата 11-20 од 67
Supercritical CO2 extraction of steroidal sapogenins from fenugreek (tngonella foenum-graecum l.) Seed
(Savez hemijskih inženjera, Beograd, 2020)
Supercritical CO2 extraction was applied on fenugreek (Trigonella foenum-graecum L., Fabaceae) seeds with the aim to define optimal process conditions to obtain the maximal extract yields content of steroidal sapogenins. ...
Selected trace element concentrations in ambient air and in horse chestnut leaves in Belgrade / Koncentracije odabranih elemenata u tragovima u vazduhu i u listovima divljeg kestena u Beogradu
(Association of the Chemical Engineers of Serbia, 2015)
In this study, airborne particulates (PM10) and leaves of horse chestnut were collected at selected urban sites in Belgrade, Serbia, in years 2006, 2009 and 2012. All samples were analysed for trace element concentrations ...
Continuous improvement concepts as a link between quality assurance and implementation of cleaner production - case study in the generic pharmaceutical industry
(Savez hemijskih inženjera, Beograd, 2016)
The subject and the research objective presented in this article is establishing of the relationship between quality assurance and implementation of cleaner production in the generic pharmaceutical industry through the ...
Challenges in bioethanol production: utilization of cotton fabrics as a feedstock
(Savez hemijskih inženjera, Beograd, 2016)
Bioethanol as a dean and renewable fuel with its major environmental benefits, represents a promising biofuel today which is mostly used in combination with gasoline. It can be produced from different kinds of renewable ...
Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants
(Savez hemijskih inženjera, Beograd, 2016)
Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration ...
Mechanochemical synthesis of CaO·ZnO.K2CO3 catalyst: Characterization and activity for methanolysis of sunflower oil / Mehanohemijska sinteza CaO·ZnO.K2CO3, katalizatora - karakterizacija i aktivnost u metanolizi suncokretovog ulja
(Association of the Chemical Engineers of Serbia, 2015)
The goal of this study was to prepare a CaO·ZnO catalyst containing a small amount of K2CO3 and analyze its activity for biodiesel synthesis. The catalyst was prepared using the following procedure: CaO and ZnO (mole ratio ...
Viscosities and refractive indices of binary systems acetone+1-propanol, acetone+1,2-propanediol and acetone+1,3-propanediol / Viskoznosti i indeksi prelamanja binarnih sistema aceton+1-propanol, aceton+1,2-propandiol i aceton+ 1,3-propandiol
(Association of the Chemical Engineers of Serbia, 2014)
Viscosities and refractive indices of three binary systems, acetone+1-propanol, acetone+1,2-propanediol and acetone+1,3-propanediol, were measured at eight temperatures (288.15, 293.15, 298.15, 303.15, 308.15, 313.15, ...
Design and optimization of purification procedure for biodiesel washing
(Association of the Chemical Engineers of Serbia, 2009)
Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst) followed by the washing procedure ...
The analysis of different processes of extraction: yield of extracts obtained from Aloe vera (Aloe barbadensis Miller) and sweet bay (Laurus nobilis L.) and the exergy analysis of applied processes
(Association of the Chemical Engineers of Serbia, 2009)
The present study was aimed to investigate and compare the efficiency of different methods for the isolation extract from a plant material. Extracts from dried leaves of Aloe vera (A. barbadensis Mill.) and Sweet Bay (Laurus ...
Damage detection of hybrid aramid/metal-PVB composite materials using optical fiber sensors
(Association of the Chemical Engineers of Serbia, 2009)
Embedding optical fiber sensors within laminar thermoplastic composite material results in forming a system known as 'smart structure'. These sensors present the information about the inner structure health during the ...