Претраживање
Приказ резултата 1-10 од 58
Procedures for processing of copper secondary raw materials / Postupci prerade sekundarnih sirovina bakra
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
The technological procedures for copper secondary raw materials processing include two basic stages: pretreatment of the copper waste and its further metallurgical processing. For copper waste pretreatment technology, there ...
Assessment of the integrity of welded pipes / Procena integriteta zavarenih cevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The subject of the paper is analysis of the integrity of welded pipes made of API J55 steel by high frequency contact welding (HF). Experimental research on the mechanical properties of the base material was conducted on ...
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Dynamic mechanical properties of aramid fabrics impregnated with multiwalled carbon nanotubes / Dinamičko mehanička svojstva aramidnih lamina impregnisanih sa višeslojnim ugljeničnim nanocevima
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Carbon nanotubes (CNT) represent allotropes of carbon with a cylindrical nanostructure. In multiwalled carbon nanotubes (MWCNT), graphitic layers make up concentric tubes. The multiwalled nanotubes length in our research ...
Polymer bonded magnetic composites based on Nd-Fe-B / Polimerni magnetni kompoziti na bazi Nd-Fe-B
(Inženjersko društvo za koroziju, Beograd, 2013)
Various types and contents of magnetic powder and polymer matrix induce different mechanical, magnetic, electrical and optical properties of final composite material. The strong influence of relatively small amounts of ...
Application of exergy analysis in recycling streams / Primena eksergijske analize u reciklažnim tokovima
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Materials for recycling always contain a certain degree of contamination. The presence of impurities i.e. contamination in the recycling streams causes a change in the composition of the original materials to recycle. As ...
Characterization of oxide coatings formed by plasma electrolytic oxidation of aluminum in sodium tungstate / Karakterizacija oksidnih slojeva dobijenih plazma elektrolitičkom oksidacijom aluminijuma u natrijum volframatu
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
This paper presents our recent research on morphology and phase composition of oxide coatings formed by plasma electrolytic oxidation of aluminum in 0.1 M sodium tungstate at constant current density of 15 mA/cm2 and ...
Basic principles and applications of photoelectrochemical reactions / Osnovni principi i primena fotoelektrohemijskih reakcija
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The paper discusses the basic principles of photoelectrochemistry and photo electrochemical reactions. Considered the application photoelectrochemicl cells in the conversion of the sun iradiation energy into electricity. ...
Indentation behaviour of 'soft film on hard substrate' composite system type / Ponašanje kompozitnih sistema tipa 'mek film na tvrdom supstratu' na testu utiskivanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
This investigation has been carried out in order to analyse and compare the hardness response of different composite systems of the same type, named 'soft film on hard substrate' composite system. Composite systems of mono- ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...