Претраживање
Приказ резултата 1-10 од 19
Epoxy coatings electrodeposited on steel electrochemically modified by Zn-Co alloys / Epoksidne kataforetske prevlake na čeliku modifikovanom Zn-Co legurama
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The corrosion behavior of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys deposited from chloride and sulphate baths were investigated during exposure to 3 % NaCl. The electrochemical impedance ...
Corrosion studies on electrochemically deposited polyaniline and polyaniline/epoxy coatings on mild steel in acid sulfate solution / Koroziono ispitivanje elektrohemijski taloženog polianilina i polianilina/epoksi prevlaka na mekom čeliku u rastvoru sumporne kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
The corrosion behavior of mild steel, mild steel covered by electrochemically deposited polyaniline (PANI) film, epoxy coating and PANI/epoxy coating system in 0.1 M sulfuric acid solution, were investigated by electrochemical ...
Valorization of gallium from acidic zinc's liquor / Valorizacija galijuma iz kiselog cinkovog luga
(Engineering Society for Corrosion, Belgrade, Serbia, 2007)
In this paper are showed the results of valorisation of gallium, that is gallium salt gallium(III) chloride, GaCl3, by adsorption with chelate resin and then by extraction with 1, 5 mol/dm3 HCI to GaCl3. The efficiency of ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Inženjersko društvo za koroziju, Beograd, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
The influence of impurities and theirs removal in the electrochemical measurements / Uticaj nečistoća i njihovo uklanjanje u elektrohemijskim merenjima
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the different kind of impurities which can have the influences on electrochemical (corrosion) measurements in the electrolytic solutions, as well as the methods of theirs removal, has been given.
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
The influence of electrochemically deposited zinc alloys on steel on the protective properties of cathaporetic epoxy coatings / Uticaj elektrohemijski taloženih legura cinka na čeliku na zaštitna svojstva epoksidne kataforetske prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Prior to cathaporetic epoxy coating deposition steel surface was modified by chemical deposition of hot dip galvanized steel and by electrochemical deposition of zinc alloys with iron group of elements (Ni, Co and Fe). The ...
Korozija metala - šta je to?
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
Korozija materijala je opšte poznat i prihvaćen izraz, ali da li se baš tačno zna šta je korozija? Pod pojmom korozija materijala se podrazumeva svako neželjeno razaranje materijala kao posledice delovanja spoljne sredine. ...
Investigation of the anodic behaviour of mild steel in different solutions as a base for the selection of suitable electrolyte for the synthesis of electro conducting polymer films / Ispitivanje anodnog ponašanja mekog čelika u različitim rastvorima u cilju izbora elektrolita za elektrohemijsku sintezu filmova elektroprovodnih polimera
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the anodic behavior of mild steel in the different solutions of the organic and the inorganic electrolytes, with the aim to select the electrolyte for the electrochemical synthesis of electro conducting polymer ...