Pretraživanje
Prikaz rezultata 11-20 od 507
Initial microstructure effect on the mechanical properties of Ti-6Al-4V ELI alloy processed by high-pressure torsion
(Elsevier Science Sa, Lausanne, 2018)
effect of initial microstructure on the mechanical properties and fracture mode of the Ti-6Al-4V ELI alloy subjected to the high-pressure torsion (HPT) processing at room temperature and 500 degrees C was investigated. In ...
In vitro evaluation of enzymatically derived blackcurrant extract as prebiotic cosmetic ingredient: extraction conditions optimization and effect on cutaneous microbiota representatives
(Springer Science and Business Media Deutschland GmbH, 2023)
Background Blackcurrant is a rich source of polyphenols with proven physiological activity, that have lately been classified as emerging prebiotics, making its extracts suitable for application in functional food and ...
Textural and fractal properties of CuO/Al 2 O 3 catalyst supports
(Elsevier, 2006)
Reactive amorphous aluminas with a high surface area, suitable as a precursor for catalyst supports, are obtained by flash calcination of gibbsite in a reactor for pneumatic transport in the dilute two phase flow regime. ...
Goat milk powders enriched with grape pomace seed extract: Physical and techno-functional properties
(Elsevier B.V., 2024)
This study aimed to evaluate the physical (particle size and ζ-potential) and techno-functional properties (emulsifying and foaming) of goat milk powders enriched with grape pomace seed extract (TME), as promising food ...
Tailoring the properties of waterborne polyurethanes by incorporating different content of poly(dimethylsiloxane)
(Progress in Organic Coatings, 2021)
A series of novel waterborne polyurethanes (WBPUs) was synthesized using alpha,omega-dihydroxypropyl poly(dimethylsiloxane) (PDMS), isophorone diisocyanate (IPDI), 2,2-bis-(hydroxymethyl) propionic acid (DMPA) and triethylamine ...
Heat-treated iron(III) tetramethoxyphenyl porphyrin supported on high-area carbon as an electrocatalyst for oxygen: I. Characterization of the electrocatalyst
(Electrochemical Soc Inc, Pennington, 1998)
Iron(III) tetramethoxyphenyl porphyrin chloride adsorbed on the Black Pearls carbon (FeTMPP-Cl/BP) was heat-treated at temperatures from 200 to 1000°C in Ar atmosphere and characterized by using cyclic voltammetry, X-ray ...
Dislocation glide-controlled room-temperature plasticity in 6H-SiC single crystals
(Elsevier Ltd, 2014)
In situ transmission electron microscopy observations of uniaxial compression of sub-300 nm diameter, cylindrical, single-crystalline 6H-SiC pillars oriented along 〈0001〉 and at 45° with respect to 〈0001〉 reveal that plastic ...
Microstructural investigation of the PZT films prepared from the suspension of nanocrystalline powders
(Elsevier Sci Ltd, Oxford, 2004)
PZT thin films of composition Pb(Zr0.52Ti0.48)O-3 were prepared by a novel method from the suspension of nanocrystalline PZT powders. The powders were obtained by mechanochemical synthesis. Films were deposited on silicon ...
Structure sensitivity of dimethylamine deep oxidation over Pt/Al2O3 catalysts
(Elsevier, 2009)
The deep oxidation of dimethylamine (DMA) was studied over Pt/Al2O3 catalysts with small (1 nm) and large (7.8-15.5 nm) Pt crystallite sizes. The turnover frequency (TOF) was higher for the large than for the small Pt ...
Hydrophobic Coatings on Cotton Obtained by in Situ Plasma Polymerization of a Fluorinated Monomer in Ethanol Solutions
(American Chemical Society, 2017)
Plasma polymerization using hydrophobic monomers in the gas phase is a well-known technology to generate hydrophobic coatings. However, synthesis of functional hydrophobic coatings using plasma technology in liquids has ...