Претраживање
Приказ резултата 41-50 од 617
Geopolymer materials based on the electric arc furnace slag
(Belgrade : Materials Research Society of Serbia, 2013)
The remelting of iron and steel scrap in the electric arc furnaces generates the non-hazardous waste – electric arc furnace slag (EAFS), which can be disposed of to appropriate landfills. Currently, this slag found its ...
Technological analysis for machining of the reformers for fuel cells testing
(Innovation Center of Faculty of Mechanical Engineering, 2017)
Reformer is an integral component of the polymeric electrolyte membrane (PEM) fuel cell and it is used for
experimental combustion testing. By analyzing the geometry of the experimental reformer, it consists of three
plates, ...
Novel negatively-charged ultrafiltration membranes made by a combination of immersion precipitation and photopolymerization
(Belgrade : Serbian Chemical Society, 2013)
Ultrafiltration (UF) membranes are currently used in industry for the concentration of proteins and other macromolecules. Performance of UF membranes is generally limited by a trade-off between permeability and selectivity ...
Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2011)
The present study compares the results of two different methods employed for preparation of polyaniline based glucose biosensor with respect to enzyme loading, biosensing efficiency and potential stability. Kinetic analysis ...
Evaluation of periodic processes with two modulated inputs based on nonlinear frequency response analysis
(3rd European Process Intensification Conference (EPIC 2011), Manchester, UK, 2011)
One way to achieve process intensification is to operate the process in a periodic way, in order to obtain better average performance compared to the optimal steady-state operation. The source of the possible improvement ...
Decopperization process of waste solutions from conventional copper electrolysis
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2012)
This paper is adresses on treatment of sulphuric acid waste solutions obtained during the conventional copper metallurgical activities. Mother liquor is a part of this solutions and it is generated during the regeneration ...
Application of nonlinear frequency response method for investigation of periodically operated chemical reactors
(Beograd : Mathematical Institute SANU, 2012)
Process intensification aims to increase the efficiency of processes in the chemical industry by development of new concepts of processing methods and equipments. One way to achieve better performance is to operate the ...
Designing of manufacturing process of reformer integrated in system with HTPEM fuel cell stack
(Belgrade : Faculty of Mechanical Engineering, Innovation Center, 2017)
In this paper is shown designing of manufacturing process of reformer in polymeric electrolyte membrane
(PEM) fuel cell. The process is based on reformer modelling, analyzing of reforming initial geometry and
change of ...
The influence of thin benzoate-doped polyaniline coatings on corrosion protection of mild steel in different environments
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2013)
The corrosion process of mild steel in the presence of benzoate-doped polyaniline coatings exposed to 3% NaCl has been investigated. This system was also tested for cathodic protection and it has proven more efficient ...
Electrochemical determination of ascorbic acid using electrochemically deposited polyaniline
(Tatranské Matliare : Slovak Society of Chemical Engineering, 2014)
Electroconducting polymers are promising materials to be used in various fields including: batteries, capacitors, electronic devices, corrosion, biosensors and sensors[1,6]. Polyaniline is probably the most investigated ...