Search
Now showing items 21-30 of 444
The influence of the deposition parameters on the porosity of thin alumina films on steel / Uticaj parametara elektroforetskog taloženja praha aluminijum-oksida iz vodenih suspenzija na poroznost dobijenih tankih filmova na čeliku
(Serbian Chemical Society, Belgrade, 2004)
The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, ...
Benzylation of N-phenyl-2-phenylacetamide under microwave irradiation / Benzilovanje N-fenil-2-fenilacetamida pomoću mikrotalasnog zračenja
(Serbian Chemical Society, Belgrade, 2008)
N-Phenyl-2-phenylacetamide was alkylated with benzyl chloride in the presence of powdered potassium hydroxide under microwave irradiation in a solvent-free system. The reactions were also performed in the presence of ...
On the serrated yielding in AlMg6.5 alloy sheet
(Serbian Chemical Society, Belgrade, 1998)
Room temperature tensile tests were performed on AlMg6.5 alloy sheet, with Initial strain rates of 6.7x10(4) s(1), 6.7x10(-3) s(-1) and 6.7x10(-2) s(-1), after imposing 70% cold rolling reductions, and annealing at 320 ...
The acid resistance and corrosion stability of polyester coatings on phosphatized steel
(Serbian Chemical Society, Belgrade, 1998)
Protective polyester coatings on phosphatized steel were obtained with different combinations of diols (2-butyl-2-ethyl-1,3-propanediol or 2,2-dimethyl-1,3-propanediol), organic acids (1,3-cyclohexanedicarboxylic acid, ...
Blends of thermoplastic starch and some thermoplastic polymers
(Serbian Chemical Society, Belgrade, 1998)
Thermoplastic starch (TPS) was blended in a twin screw mixer with 5 and 10 mass % of poly(ethylene-co-acrylic acid) (EAA), poly(ethylene-co-vinyl acetate) (EVA) or cellulose acetate (CA) in order to improve the TPS properties. ...
Modeling of drawing thin glass sheet from a preform
(Serbian Chemical Society, Belgrade, 1998)
A one-dimensional model of thin glass sheet drawing has been developed. This model includes momentum, heat and mass balance equations. The density, viscosity and specific heat of the glass were calculated as functions of ...
Viscoelastic properties of Na-carboxymethylcellulose solutions
(Serbian Chemical Society, Belgrade, 1998)
The rheological characteristics of 5% solutions of Na-carboxymethylcellulose (CMC)I of various origin were investigated. Depending on the molar mass (1.25-1.94 x 10(5) g mol(-1)), i.e., the degree of polymerization (545-851) ...
Reactivity of beta-aroylacrylic acids with diazodiphenylmethane
(Serbian Chemical Society, Belgrade, 1998)
The rate constants for 10 trans-substituted beta-aroylacrylic acids in their reaction with diazodiphenylmethane (DDM) were determined in ethanol at 30 degrees C. The intention was to study the transmission of electronic ...
Cubic equation of state models for the liquid excess heat capacity calculations. I. Mixing rules
(Serbian Chemical Society, Belgrade, 1998)
Binary liquid excess heat capacities, c(p)(E), were calculated by the PRSV EOS coupled with the van der Waals one fluid (vdW), the modified van der Waals one fluid (Schwartzentruber-Renon)(SR) and the Orbey-Sandler ...
The influence of a cryoprotective medium containing glycerol on the lyophilization of lactic acid bacteria / Uticaj krioprotektivnog medijuma sa glicerolom na liofilizaciju bakterija mlečne kiseline
(Serbian Chemical Society, 2001)
The aims of lyophilization (freeze-drying) of lactic acid bacteria are to preserve pure cultures or to prepare starters for the dairy industry. In both cases, the choice of the cryoprotectant is very important. In this ...