Pretraživanje
Prikaz rezultata 41-50 od 50
Influence of compression speed and deformation percentage on mechanical properties of calcium alginate particles / Uticaj brzine kompresije i procenta deformacije na mehaničke karakteristike kalcijum alginatnih čestica
(Association of the Chemical Engineers of Serbia, 2015)
Hydrogel particles are often used as carriers for the immobilization of enzymes, polyphenolic antioxidants, whole microbial, plant or mammalian cells. In many processes, the mechanical properties of alginate particles are ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
PMMA-Y2O3 (Eu3+) nanocomposites: Optical and mechanical properties / Nanokompozit PMMA-Y2O3 (Eu3+) - optička i mehanička svojstva
(Serbian Chemical Society, Belgrade, 2011)
The results of a study related to the processing and characterization of poly(methyl methacrylate) (PMMA)-Y2O3 (Eu3+) nanocomposites are presented herein. The nanocomposite samples were prepared using a laboratory mixing ...
Influence of SA procedure welding parameters on mechanical properties spiral welded steel tubes API X60 / Uticaj parametara EPP postupka zavarivanja na mehaničke osobine spiralno zavarenih cevi od čelika API X60
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2009)
The selection of steel, the dimensions and methods of seam welded steel tubes fabrication are closely connected to the function of tube as a whole structure in specific working conditions, for a calculated service life. ...
Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior
(MDPI, 2024)
While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart ...
Proučavanje uticaja metalnih vlakana na neka svojstva tehničkih pređa / Investigation of influence of metallic fibers on some properties of technical yarns
(Savez hemičara i tehnologa Srbije, 2000)
Ispitivana su neka mehanička i elektrofizička svojstva pređa formiranih od mešavine pamučnih i metalnih vlakana. Rezultati su upoređeni sa rezultatima dobijenim za pamučne pređe iste finoće. Registrovano je smanjenje ...
Titanium dioxide nanoparticles surface modified with imine as fillers for epoxy resin / Nanočestice titan-dioksida površinski modifikovane iminom kao punioci za epoksidnu smolu
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2018)
The surface of anatase TiO2 nanoparticles was modified with in situ synthesized imine, based on 3,4-dihydroxybenzaldehyde and octadecylamine. The modified TiO2 nanoparticles were investigated using FTIR and UV-Vis spectroscopy, ...
Structural, optical and mechanical characterization of PMMA- MXene composites functionalized with MEMO silane
(Taylor & Francis Group, 2022)
Processing and characterization of PMMA-MXene composites were investigated. γ-Methacryloxypropyltrimethoxy (MEMO) silane was used to modify the surface of MXenes and improve the compatibility between MXenes and the polymer. ...