Search
Now showing items 31-40 of 744
A new approach to the velocity field investigation in case of the entry flow in curved pipes with circular cross section
(Springer Wien, Wien, 2000)
In this paper an analysis of a laminar flow in a bend preceded by the straight section is presented. The flow is supposed to be unperturbed far upstream, while far downstream it becomes fully developed. In the vicinity of ...
Adhesion and corrosion resistance of epoxy primers used in the automotive industry
(Taylor & Francis Ltd, Abingdon, 2007)
One of the most important factors in corrosion prevention by protective coatings is the loss of adhesion of the coating under environmental influence. Thus, adhesion strength is often used when characterizing protective ...
Thermal stability of starch benzoate
(Elsevier Sci Ltd, Oxford, 2005)
Starch esterification with benzoyl chloride was performed in two steps, the first being the alkali treatment of the starch and the second, esterification. Samples of hydrophobic starch benzoate were synthesized with degrees ...
New analytical HFET I-V characteristics model
(Natl Inst Optoelectronics, Bucharest-Magurele, 2006)
In this paper the new analytical model of current - voltage characteristics of a Heterostructure Field Effect Transistor (HFET), is proposed. The model is relatively simple, and at the same time, it describes complex HFET ...
Characterization of colloidal chromia particles obtained by forced hydrolysis
(Pergamon-Elsevier Science Ltd, Oxford, 2003)
Colloidal particles of chromia have been prepared by forced hydrolysis of an aqueous solution containing chromium chloride hexahydrate. At elevated temperature, a controlled addition of potassium hydroxide yielded colloidal ...
Synthesis and characterization of complexes between poly(itaconic acid) and poly(ethylene glycol)
(Springer, New York, 2004)
Interpolymer complexes of poly(itaconic acid) and poly(ethylene glycol) (PIA/PEG) were prepared by two different procedures: simple mixing of preformed PIA and PEG and by polymerization of itaconic acid on poly(ethylene ...
Hydrogels based on 2-hydroxyethyl methacrylate obtained by gamma irradiation
(6th Conference of the Yugoslav Materials Research Society, YUCOMAT VI: Current Research in Advanced Materials and Processes, 2005)
Hydrogels based on 2-hydroxyethyl methacrylate and different types of poly(alkylene glycol) acrylates and methacrylates, with a small percent of itaconic acid, have been prepared by solution copolymerization using gamma ...
Correlation between apparent activation energy for hot working and temperature of no recrystallization in microalloyed steels
(Trans Tech Publications Ltd, Durnten-Zurich, 2003)
Two-stage linear ln[sinh(as)] vs 1/T plots, based on the stress data derived from either continuous or multipass flow curves generated by testing low carbon Nb/Ti microalloyed steel (Nb steel) and medium carbon V-microalloyed ...
Operating regime of a biphasic oil/aqueous hollow-fibre reactor with immobilized lipase for oil hydrolysis
(Elsevier Sci Ltd, Oxford, 2004)
Lipase from Candida rugosa was immobilized on Cuprophane membrane in a hollow-fibre module for possible application for oil hydrolysis. A simple immobilization technique was applied and 154.8 mg m(-2) lipase was immobilized ...