Претраживање
Приказ резултата 1-10 од 19
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Moisture absorption capacity of polyamide 6,6 fabrics surface functionalised by chitosan-based hydrogel finishes
(Elsevier Science Sa, Lausanne, 2011)
The present study aims at investigating the moisture absorption capacity of polyamide 6,6 fabrics when their surface is functionalised by chitosan-based hydrogels. For the finishing procedure, bulk hydrogels of chitosan ...
Electrochemical synthesis and characterization of polyaniline thin film and polyaniline powder
(Elsevier Science Sa, Lausanne, 2011)
The polyaniline thin film electrode and powder have been synthesized on graphite electrodes from 0.5 M hydrochloric acid solution under galvanostatic conditions. The water insoluble and acetone soluble polyaniline mass ...
The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating
(Elsevier Science Sa, Lausanne, 2010)
One of the most important factors in corrosion prevention by protective coatings is the coating adhesion loss under environmental influence. Thus, adhesion strength is often used when characterizing protective properties ...
Corrosion stability of polyester coatings on steel pretreated with different iron-phosphate coatings
(Elsevier Science Sa, Lausanne, 2011)
The influence of steel surface pretreatment with different types of iron-phosphate coatings on the corrosion stability and adhesion characteristics of polyester coatings on steel was investigated. The phosphate coating was ...
The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium
(Elsevier Science Sa, Lausanne, 2012)
Composite coatings based on lignin, obtained by electrophoretic deposition (EPD) on titanium, were investigated. The aim of this work was to produce hydroxyapatite/lignin (HAP/Lig) coatings on titanium and to investigate ...
The influence of Ce-based coatings as pretreatments on corrosion stability of top powder polyester coating on AA6060
(Elsevier Science Sa, Lausanne, 2013)
Cerium-based conversion coatings (CeCCs) are one of the most prospective alternatives to the widely used chromate conversion coatings (CCCs) due to their anticorrosion efficiency, environmentally friendly nature and low ...
Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates
(Elsevier Science Sa, Lausanne, 2012)
The properties of urethane acrylate resin mixtures based on the linear and hyperbranched aliphatic polyesters were examined. Linear polyester was synthesized from neopentil glycol and adipic acid. Hyperbranched polyester ...
Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6
(Elsevier Science Sa, Lausanne, 2016)
Novel TiO2-PANI core-shell nanocomposite, prepared by in situ oxidative polymerization of aniline in the presence of TiO2 nanoparticles surface modified with vitamin B6, was used to reinforce epoxy resin. The size of ...
The protective properties of epoxy coating electrodeposited on Zn-Mn alloy substrate
(Elsevier Science Sa, Lausanne, 2015)
The epoxy coating was cataphoretically deposited on steel and steel modified by electroplated Zn-Mn alloy of different chemical contents. The samples were immersed in 0.5 mol dm(-3) NaCl solution for 60 days. The electrochemical ...