Претраживање
Приказ резултата 1-10 од 26
Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials ...
Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution
(Elsevier Science Bv, Amsterdam, 2013)
The influence of corrosion on the microstructure of thixoformed and heat-treated ZA27 alloys was investigated. The microstructure of ZA27 alloy was affected by heat treatment. The process of electrochemical corrosion occurs ...
Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution
(Elsevier Science Bv, Amsterdam, 2016)
The influence of corrosion on the surface appearance and microstructure of particulate ZA27/SiCp composites was examined after 30 d immersion in a sodium chloride solution with the access of atmospheric oxygen. The composites ...
Corrosion protection of mild steel by polypyrrole coatings in acid sulfate solutions
(Pergamon-Elsevier Science Ltd, Oxford, 1997)
The corrosion behaviour of mild steel covered by the electrodeposited polypyrrole films was investigated by electrochemical impedance spectroscopy. Electrodeposition of polypyrrole was performed from aqueous solution of ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier Science Sa, Lausanne, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to 3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
(Springer, New York, 2008)
Experimental setup with a submerged cavitating jet has been used for the study of influences of material, exposure time and working fluid temperature on the erosion process. Each of the parameters has been varied separately, ...
Corrosion studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution
(Elsevier Science Sa, Lausanne, 2005)
The corrosion behavior of mild steel and mild steel covered by electrochemically deposited (a) polyaniline (PANI) film, (b) epoxy coating
and (c) PANI/epoxy coating system in 0.1 M sulfuric acid solution were investigated ...
The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
(Elsevier Science Sa, Lausanne, 2003)
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...