Pretraživanje
Prikaz rezultata 1-10 od 843
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Removal of ethylene oxide from waste gases by absorption / Uklanjanje etilen-oksida iz otpadnih gasova postupkom apsorpcije
(Association of Chemical Engineers of Serbia, 2011)
Ethylene oxide (EtO) is an organic compound, which is used as a starting material in the production of polymers and as sterilizing agent for thermolabile materials. Although ethylene oxide is not common as an organic ...
The sorption of inorganic arsenic on modified sepiolite: the effect of hydrated iron(III) oxide
(Srpsko hemijsko društvo, Beograd, 2014)
The sorption of inorganic arsenic species, As(III) and As(V), from water by sepiolite modified with hydrated iron(III) oxide was investigated at 25 degrees C through batch studies. The influence of the initial pH value, ...
Properties of aliphatic hyperbranched polyesters in dilute solutions
(Serbian Chemical Society, 2007)
The results of an investigation of the influence of the synthesis procedure, number of pseudo generations and degree of branching of hydroxy-functional aliphatic hyperbranched polyesters (AHBP) on the values of limiting ...
A new dimensionless group for the estimation of the current density distribution in an electrochemical cell / Нова бездимензиона група за процену расподеле густине струје у електрохемијској ћелији
(Serbian Chemical Society, 2005)
A new dimensionless group for the estimation of the current density distribution in an electrochemical cell is defined as the ratio of the sum of the absolute values of the anodic and cathodic overpotentials to the overall ...
Liquid metal/ceramic interfaces in dental practice and jewellery manufacturing
(Institute of Metals and Technology, 2010)
Metal-ceramic fusing has been the essential step in obtaining materials that benefit from both ceramic and metal constituents. i e where the combined properties of metal and ceramic layers are desirable When considering ...
The bioethanol production with the thin stillage recirculation
(Association of the Chemical Engineers of Serbia, 2009)
In this paper, the bioethanol production with the thin stillage recirculation in mashing was investigated. The mashing was performed with recirculation of: 0, 10, 20 and 30% of the thin stillage. The thin stillage recirculation ...
Numerical analysis of constraint effect on ductile tearing in strength mismatched welded cct specimens using micromechanical approach
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2011)
In this paper, constraint effect on ductile fracture initiation and propagation has been studied. Three-dimensional finite element analyses of mismatched welded joints made of high strength steel, have been performed for ...
Structural life assessment of oil rig pipes made of api j55 steel by high frequency welding
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
Structural life of welded pipes made of API J55 steel by high-frequency (HF) welding has been evaluated. Experimental tests of base metal mechanical properties, including fatigue properties, were conducted on pipes after ...
Progress in the production of bioethanol on starch-based feedstocks
(Association of the Chemical Engineers of Serbia, 2009)
Bioethanol produced from renewable biomass, such as sugar, starch, or lignocellulosic materials, is one of the alternative energy resources, which is both renewable and environmentally friendly. Although, the priority in ...