Search
Now showing items 1-10 of 16
Application of permeable materials for CBRN protective equipment / Primena filtrosorpcionih materijala za NHB zaštitnu opremu
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The new concept of chemical, biological, radiological and nuclear combat clothing offers the opportunity of substantial cost savings by eliminating the need for additional, CBRN over garments, whose high weight and poor ...
Prednosti zavarivanja trenjem sa mešanjem u odnosu na elektrolučno zavarivanje - zaštita zdravlja i životne sredine i bezbednost na radu / Advantages of friction stir welding over arc welding with respect to health and environmental protection and work safety
(Society for Structural Integrity and Life (DIVK), 2015)
U savremenoj industrijskoj proizvodnji, svaki proizvodni proces treba da bude ispitan u pogledu uticaja na životnu sredinu. Za svaku kompaniju koja investira u novi proces je od značaja pažljivo razmatranje HSE (Health, ...
Exploitation properties of ni-pd/al2o3 catalyst supported on ceramic foam
(Savez inženjera metalurgije Srbije, Beograd, 2015)
The goal of this research was to examine exploitation properties of Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam in the dry methane reforming. The catalyst was prepared by using aerosol method. Chloride precursors ...
Impact of roughness of Zn-Mn coatings on corrosive stability / Uticaj hrapavosti Zn-Mn prevlaka na korozionu postojanost
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
This paper involves electrochemical deposition of Zn-Mn coatings from four solutions. We measured their roughness and corrosion stability. We used cathodes made of steel of unknown composition that were licensed under the ...
Application of exergy analysis in recycling streams / Primena eksergijske analize u reciklažnim tokovima
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Materials for recycling always contain a certain degree of contamination. The presence of impurities i.e. contamination in the recycling streams causes a change in the composition of the original materials to recycle. As ...
Finite element analysis of fracture resistance parameters for stationary semi-elliptical surface cracks in high strength steel / Analiza parametara otpornosti na lom metodom konačnih elemenata, kod stacionarnih polueliptičnih prslina u čeliku povišene čvrstoće
(Society for Structural Integrity and Life, Institute for Material Testing, 2015)
This study deals with numerical simulations based on elastic-plastic finite element method for nonlinear stress analyses on pre-cracked tensile specimens with high strength properties. The influence of crack geometry on ...
The effect of cooling rate of slag from primary copper production in the valorization of copper in the flotation process
(Savez inženjera metalurgije Srbije, Beograd, 2015)
Technological procedure of slow cooling slag from primary copper production is applied in the purpose of copper recovery in the level of 98.5% to blister. This technological procedure is divided into two phases, first slow ...
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...
Micromechanical crack analysis of glass-epoxy laminated composites subjected to tension load / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog na zatezanje
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The main objective of this study is to determine tensile properties of the glass-epoxy polymer composite material. The material is glass fiber 280 g/m², 'twill woven' with 100 cm width, type - Interglas 92125, and epoxy ...