Претраживање
Приказ резултата 1-10 од 200
Densities, viscosities, and surface and interfacial tensions of the ternary mixture water plus ethyl butyrate plus methanol at 303.15
(Amer Chemical Soc, Washington, 2003)
The excess molar volumes, V-E, viscosity deviations, Deltaeta, and excess surface tensions were calculated from the measured density, viscosity, and surface tension values, a, over the whole miscibility composition range ...
Surface characteristics and antibacterial activity of a silver-doped carbon monolith
(Natl Inst Materials Science, Ibaraki, 2008)
A carbon monolith with a silver coating was prepared and its antimicrobial behaviour in a flow system was examined. The functional groups on the surface of the carbon monolith were determined by temperature-programmed ...
The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces
(Soc Brasileira Quimica, Sao Paulo, 2005)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on aluminium and modified aluminium surfaces (phosphatized, chromatized-phosphatized and anodized aluminium) using a constant voltage method (resin ...
Characterization of autochthonous Lactobacillus paracasei strains on potential probiotic ability
(Croatian Dairy Union, 2010)
Lactic acid bacteria strains isolated from traditional made cheeses constitute a reservoir of unexplored potential in biotechnology. In this study four autochthonous lactobacilli strains, isolated from traditional white ...
Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys
(Japan Inst Metals, Sendai, 2009)
The as-cast matrix microstructure in 19 mass%Cr-2.8 mass%C white cast iron with up to 4.7 mass% V additions has been studied. Type and degree of the austenite transformation in the course of cooling after solidification ...
Influence of the damage level during quenching on thermal shock behavior of low cement castable
(International Institute for the Science of Sintering, Beograd, 2010)
In the recent decades, the use of unshaped monolithic refractories has been increasing greatly because of their significant advantages over other shaped refractory bricks of the same class. A low cement high alumina castable ...
Degradation behaviour of PCL/PEO/PCL and PCL/PEO block copolymers under controlled hydrolytic, enzymatic and composting conditions
(Elsevier Sci Ltd, Oxford, 2017)
Short-term hydrolytic and enzymatic degradation of poly(epsilon-caprolactone) (PCL), one series of triblock (PCL/PEO/PCL) and the other of diblock (PCL/PEO) copolymers, with a low content of hydrophilic PEO segments is ...
A Kinetic Study of Candida rugosa Lipase-Catalyzed Synthesis of 4,6-Dimethyl-3-cyano-2-pyridone
(Sociedade Brasileira de Química, 2010)
The synthesis of 4,6-dimethyl-3-cyano-2-pyridone was studied in a reaction catalyzed with Candida rugosa lipase. A response surface methodology (RSM) was applied for the optimization of the experimental conditions. The ...
The nucleation behavior of k2o center dot tio2 center dot 3geo(2) undercooled melt
(University of Chemistry and Technology, Prague, 2009)
The nucleation of K2TiGe3O9 crystals in an undercooled melt of stoichiometric composition was studied. Volume nucleation with spherical morphology of the growing crystals was determined. The nucleation range is in the ...
Thermal shock damage characterization of high temperature ceramics by non destructive test methods
(University of Chemistry and Technology, Prague, 2008)
In the present work a mixture of commercially available spinel, quartz (SiO2) and alumina (Al2O3) corresponding to cordierite stoichiometry was used as starting material for obtaining cordierite/SiC composite ceramics with ...