Претраживање
Приказ резултата 1-10 од 58
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Modelling and optimization of surfactant sensor response characteristics for the use in surface water and wastewater analysis / Modelovanje i optimizovanje održivih karakteristika tenzidnog senzora za korišćenje pri analizi površinskih i otpadnih voda
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The theoretical model of potentiometric titration curves of sodium dodecyl sulfate (anionic surfactant) was proposed and the response parameters of two surfactant sensors (commercial and self-made) were investigated. The ...
Fluoride ion adsorption onto Al-alginate particles / Adsorpcija fluoridnih jona na Al-alginatnim česticama
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Fluoride ions are increasingly present in the groundwater mainly due to the anthropogenic activity. On the other hand, increased awareness of harmful effects caused by high concentrations of F-in drinking water, leads to ...
Development of an effective method for internal pipeline corrosion control in the presence of CO2 / Razvijanje efikasne metode zaštite cevovovoda od unutrašnje korozije u prisustvu CO2
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
This paper reports on progress in developing an effective method for internal pipeline corrosion control in the presence of CO2. The inhibition effect of talloil diethylenetriamine imidazoline (TOFA/DETA imidazoline) on ...
The characterization of ternary Zn-Ni-Co alloy coatings electrochemically deposited on steel from sulfate solution / Karakterizacija prevlaka trojnih legura Zn-Ni-Co na čeliku elektrolitički taloženih iz sulfatnog rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this work the electrochemical deposition of ternary Zn-Ni-Co alloy coatings on steel from sulfate, additive-free electrolyte, was investigated. The ratio of metal cations [Co2+]/[Ni2+] in the plating solution was analysed, ...
The comparative study of the corrosion stability of Zn-Ni-Co alloy coatings deposited from chloride and sulphate baths / Uporedna analiza korozione stabilnosti prevlaka Zn-Ni-Co legura elektrohemijski taloženih iz hloridnih i sulfatnih rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The ternary Zn-Ni-Co alloy coatings were electrodeposited on steel from chloride and sulphate baths. The deposition was carried out galvanostatically at different current densities at ambient temperatures from additives ...
Tailoring the corrosion resistance of Zn-Mn coating by electrodeposition from deep eutectic solvents / Poboljšanje korozione postojanosti Zn-Mn prevlake, elektrohemijskim taloženjem iz dubokih eutektičkih smeša
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Well adhered, homogenous coatings were obtained from deep eutectic solvents (DES) based on choline chloride and urea, at current densities up to 20 mA cm-2. The coatings' morphology was analyzed by atomic force microscopy, ...
Production of rubber plasticizers based on waste PET: Techno-economical aspect / Sinteza plastifikatora iz otpadnog PET-a za primenu u gumenim proizvodima - tehno-ekonomska analiza
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
Production of rubber plasticizers, based on waste poly(ethylene terephthalate) (PET), and economic effectiveness of developed technologies are presented and discussed. Waste PET glycolyzates, named diisononyl terephthalate(DINTP), ...
Time: Temperature superposition principle: Application of WLF equation in polymer analysis and composites / Princip superponiranja vremena i temperature - primena WLF jednačine za ispitivanje polimera i kompozita
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Polymers are the most studied viscoelastic material. The shorter times (high frequencies) corresponding to lower temperatures and long times (low frequencies) to high temperatures. This represents the quantitatively applied ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...