Претраживање
Приказ резултата 1-10 од 530
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...
Luženje potencijalno toksičnih elemenata iz kompozita na bazi otpadnih sirovina / Leaching of the potentially toxic pollutants from composites based on waste raw material
(Savez hemijskih inženjera, Beograd, 2012)
Odlaganje letećeg pepela dobijenog u procesu sagorevanja uglja u termo-elektranama predstavlja veliki rizik za prirodnu sredinu zbog mogućnosti luženja opasnih čestica kao što su toksični metali. Takođe, opasnost od ...
Nanoparticle shapes: Quantification by elongation, convexity and circularity measures
(Journal of Electrical Engineering, 2019)
The goal of the nanoparticle synthesis is, first of all, the production of nanoparticles that will be more similar in size and shape. This is very important for the possibility of studying and applying nanomaterials because ...
Fluidized bed combustion of pesticide-manufacture liquid wastes / Sagorevanje tečnog otpada fabrike pesticida u fluidizovanom sloju
(Serbian Chemical Society, 2010)
Industrial liquid wastes can be in the form of solutions, suspensions, sludges, scums or waste oil and have organic properties. The objective of this work was to demonstrate the technical feasibility of a fluidized bed as ...
The effect of polar solvents on the synthesis of poly(urethane-urea-siloxane)s / Uticaj polarnih rastvarača na sintezu poli(uretan-urea-siloksana)
(Serbian Chemical Society, 2012)
Segmented poly(urethane-urea-siloxanes) (PUUS) based on 4,4'- methylene diphenyl diisocyanate-ethylene diamine (MDI-ED) hard segments and hydroxypropyl-terminated poly(dimethylsiloxane) (PDMS, Mn = 1000 g mol-1) soft ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Corrosion resistance of high pressure torsion obtained commercially pure titanium in acidic solution
(University of Osijek, Tech Fac, Slavonski Brod, 2017)
The enhancement of commercially pure titanium (cpTi) mechanical properties, which is required for its medical application, can be achieved by grain refinement obtained by severe plastic deformation. In addition to mechanical ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Removal of ethylene oxide from waste gases by absorption / Uklanjanje etilen-oksida iz otpadnih gasova postupkom apsorpcije
(Association of Chemical Engineers of Serbia, 2011)
Ethylene oxide (EtO) is an organic compound, which is used as a starting material in the production of polymers and as sterilizing agent for thermolabile materials. Although ethylene oxide is not common as an organic ...
The sorption of inorganic arsenic on modified sepiolite: the effect of hydrated iron(III) oxide
(Srpsko hemijsko društvo, Beograd, 2014)
The sorption of inorganic arsenic species, As(III) and As(V), from water by sepiolite modified with hydrated iron(III) oxide was investigated at 25 degrees C through batch studies. The influence of the initial pH value, ...