Pretraživanje
Prikaz rezultata 1-9 od 9
The EIS investigation of powder polyester coatings on phosphated low carbon steel: The effect of NaNO2 in the phosphating bath
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effect of different type of iron-phosphate coatings on corrosion stability and adhesion characteristic of top powder polyester coating on steel was investigated. Iron-phosphate coatings were deposited on steel in the ...
Chemical vapour deposition at atmospheric pressure of graphene on molybdenum foil: Effect of annealing time on characteristics and corrosion stability of graphene coatings
(Pergamon-Elsevier Science Ltd, Oxford, 2016)
In this work, the effect of pre-annealing of Mo substrate on the quality of graphene layers grown by chemical vapour deposition was investigated by X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. ...
Initial corrosion protection of Zn-Mn alloys electrodeposited from alkaline solution
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effects of a deposition current density (c.d.) on the corrosion behaviour of Zn-Mn alloy coatings, deposited from alkaline pyrophosphate solution, were investigated by atomic absorption spectrophotometry (AAS), X-ray ...
Corrosion protection of aluminium pretreated by vinyltriethoxysilane in sodium chloride solution
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
The corrosion protection of vinyltriethoxysilane (VTES) films on aluminium during exposure to 3% NaCl was investigated using electrochemical impedance spectroscopy (EIS), potential-time measurements and optical microscopy ...
Inhibition properties of self-assembled corrosion inhibitor talloil diethylenetriamine imidazoline for mild steel corrosion in chloride solution saturated with carbon dioxide
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The inhibition effect of talloil diethylenetriamine imidazoline (TOFA/DETA imidazoline) on corrosion of mild steel in chloride solutions saturated with CO2 was investigated by weight loss measurements (WL) and atomic force ...
Comprehensive electrochemical study on corrosion performance of graphene coatings deposited by chemical vapour deposition at atmospheric pressure on platinum-coated molybdenum foil
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
In this work, we present the results of electrochemical, Raman, FE-SEM/EDS, and XPS studies of graphene coatings deposited by chemical vapour deposition at atmospheric pressure on Mo foil and Pt-coated Mo foil as catalysts. ...
Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's ...
The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effect of heat treatment on the microstructure and corrosion behaviour of Zn27Al1 5CuO 02Mg alloy was examined The alloy was prepared by melting and casting route and then thermally processed (T4 regime) Corrosion ...
Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
The electrochemical behaviour of the Ti-13Nb-13Zr and Ti-6Al-4V ELI alloys with martensitic microstructures was investigated by polarization and electrochemical impedance spectroscopy (EIS) in Ringer's solution. The impedance ...