Претраживање
Приказ резултата 1-10 од 13
PMMA-Y2O3 (Eu3+) nanocomposites: Optical and mechanical properties / Nanokompozit PMMA-Y2O3 (Eu3+) - optička i mehanička svojstva
(Serbian Chemical Society, Belgrade, 2011)
The results of a study related to the processing and characterization of poly(methyl methacrylate) (PMMA)-Y2O3 (Eu3+) nanocomposites are presented herein. The nanocomposite samples were prepared using a laboratory mixing ...
Influence of compression speed and deformation percentage on mechanical properties of calcium alginate particles / Uticaj brzine kompresije i procenta deformacije na mehaničke karakteristike kalcijum alginatnih čestica
(Association of the Chemical Engineers of Serbia, 2015)
Hydrogel particles are often used as carriers for the immobilization of enzymes, polyphenolic antioxidants, whole microbial, plant or mammalian cells. In many processes, the mechanical properties of alginate particles are ...
Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging / Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja
(Association of the Chemical Engineers of Serbia, 2015)
The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. ...
The use of image analysis for the study of interfacial bonding in solid composite propellant / Korišćenje analize slike za određivanje interakcija u čvrstim kompozitnim gorivima
(Serbian Chemical Society, Belgrade, 2007)
In the framework of this research, the program Image Pro Plus was applied for determining the polymer-oxidizer interactions in HTPB-based composite propellants. In order to improve the interactions, different bonding agents ...
Smart hydrogels based on itaconic acid for biomedical application / Inteligentni hidrogelovi na bazi itakonske kiseline za biomedicinsku primenu
(Association of Chemical Engineers of Serbia, 2009)
pH and temperature sensitive hydrogels, based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) copolymers, were prepared by gamma irradiation and characterized in order to examine their potential use in biomedical ...
Influence of heat treatment on mechanical and sorptional properties of viscose-based nonwovens
(Niscair, 2005)
The influence of heat treatment on sorptional and mechanical properties of viscose: polypropylene (90:10) blend nonwoven fleeces has been studied. It is observed that the heat treatment improves mechanical properties ...
Mechanical properties of biomorphic silicon carbide ceramics
(International Institute for the Science of Sintering, Beograd, 2011)
Biomorphous β-SiC ceramics were produced from linden wood by impregnation with tetraethyl orthosilicate (TEOS), followed pyrolysis and high temperature treatment at 1580°C. Six specimen groups included charcoal and five ...
Mechanical properties correlation to processing parameters for advanced alumina based refractories
(International Institute for the Science of Sintering, Beograd, 2012)
Alumina based refractories are usually used in metallurgical furnaces and their thermal shock resistance is of great importance. In order to improve thermal shock resistance and mechanical properties of alumina based ...
PVB/sepiolite nanocomposites as reinforcement agents for paper
(Srpsko hemijsko društvo, Beograd, 2016)
In order to improve the mechanical properties of paper, 1, 3 and 5 wt. % of sepiolite were dispersed in a poly(vinyl butyral) (PVB) matrix and coated onto the surface of schrenz (110 g m(-2)). Deagglomerated sepiolite ...
Salt template zirconia reinforcing particles as possible reinforcement for PMMA matrix composite
(Sage Publications Ltd, London, 2019)
To obtain flakes like zirconia particles at relatively low temperature, the synthesis method for producing zirconia particles on the surface of salt particles that serve as a template is examined. The produced particles ...