Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates
Samo za registrovane korisnike
2012
Autori
Džunuzović, Enis
Tasić, Srba V.
Božić, Branislav R.
Džunuzović, Jasna

Dunjić, Branko

Jeremić, Katarina B.
Članak u časopisu (Objavljena verzija)

Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The properties of urethane acrylate resin mixtures based on the linear and hyperbranched aliphatic polyesters were examined. Linear polyester was synthesized from neopentil glycol and adipic acid. Hyperbranched polyester of the third generation was synthesized from 2,2-bis(hydroxymethyl)propionic acid and di-trimethylol propane. The modification of 60% of hyperbranched aliphatic polyester OH end groups was carried out with isononanoic acid or with soybean fatty acids. Two hyperbranched urethane acrylates, with the same degree of acrylation, and one linear urethane acrylate were obtained by reaction of appropriate polyester and isophorone diisocyanate and 2-hydroxyethyl acrylate. The influence of added amount of HUA and nature of non-acrylic end groups on the rheological, mechanical and thermal properties of the uncured and UV cured mixtures diluted with 20 wt.% hexanediol diacrylate was examined. The nature of non-acrylic end groups have great effect on the interaction between linear a...nd hyperbranched urethane acrylates, which further has a crucial influence on the examined properties of uncured and UV cured mixture samples.
Ključne reči:
Urethane acrylate / Hyperbranched polyester / Soybean fatty acids / Isononanoic acid / UV curing / Dynamic mechanical propertiesIzvor:
Progress in Organic Coatings, 2012, 74, 1, 158-164Izdavač:
- Elsevier Science Sa, Lausanne
Finansiranje / projekti:
- Sinteza i karakterizacija novih funkcionalnih polimera i polimernih nanokompozita (RS-172062)
- Materijali redukovane dimenzionalnosti za efikasnu apsorpciju svetlosti i konverziju energije (RS-45020)
DOI: 10.1016/j.porgcoat.2011.12.004
ISSN: 0300-9440
WoS: 000302585300020
Scopus: 2-s2.0-84857998581
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Džunuzović, Enis AU - Tasić, Srba V. AU - Božić, Branislav R. AU - Džunuzović, Jasna AU - Dunjić, Branko AU - Jeremić, Katarina B. PY - 2012 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2211 AB - The properties of urethane acrylate resin mixtures based on the linear and hyperbranched aliphatic polyesters were examined. Linear polyester was synthesized from neopentil glycol and adipic acid. Hyperbranched polyester of the third generation was synthesized from 2,2-bis(hydroxymethyl)propionic acid and di-trimethylol propane. The modification of 60% of hyperbranched aliphatic polyester OH end groups was carried out with isononanoic acid or with soybean fatty acids. Two hyperbranched urethane acrylates, with the same degree of acrylation, and one linear urethane acrylate were obtained by reaction of appropriate polyester and isophorone diisocyanate and 2-hydroxyethyl acrylate. The influence of added amount of HUA and nature of non-acrylic end groups on the rheological, mechanical and thermal properties of the uncured and UV cured mixtures diluted with 20 wt.% hexanediol diacrylate was examined. The nature of non-acrylic end groups have great effect on the interaction between linear and hyperbranched urethane acrylates, which further has a crucial influence on the examined properties of uncured and UV cured mixture samples. PB - Elsevier Science Sa, Lausanne T2 - Progress in Organic Coatings T1 - Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates EP - 164 IS - 1 SP - 158 VL - 74 DO - 10.1016/j.porgcoat.2011.12.004 ER -
@article{ author = "Džunuzović, Enis and Tasić, Srba V. and Božić, Branislav R. and Džunuzović, Jasna and Dunjić, Branko and Jeremić, Katarina B.", year = "2012", abstract = "The properties of urethane acrylate resin mixtures based on the linear and hyperbranched aliphatic polyesters were examined. Linear polyester was synthesized from neopentil glycol and adipic acid. Hyperbranched polyester of the third generation was synthesized from 2,2-bis(hydroxymethyl)propionic acid and di-trimethylol propane. The modification of 60% of hyperbranched aliphatic polyester OH end groups was carried out with isononanoic acid or with soybean fatty acids. Two hyperbranched urethane acrylates, with the same degree of acrylation, and one linear urethane acrylate were obtained by reaction of appropriate polyester and isophorone diisocyanate and 2-hydroxyethyl acrylate. The influence of added amount of HUA and nature of non-acrylic end groups on the rheological, mechanical and thermal properties of the uncured and UV cured mixtures diluted with 20 wt.% hexanediol diacrylate was examined. The nature of non-acrylic end groups have great effect on the interaction between linear and hyperbranched urethane acrylates, which further has a crucial influence on the examined properties of uncured and UV cured mixture samples.", publisher = "Elsevier Science Sa, Lausanne", journal = "Progress in Organic Coatings", title = "Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates", pages = "164-158", number = "1", volume = "74", doi = "10.1016/j.porgcoat.2011.12.004" }
Džunuzović, E., Tasić, S. V., Božić, B. R., Džunuzović, J., Dunjić, B.,& Jeremić, K. B.. (2012). Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates. in Progress in Organic Coatings Elsevier Science Sa, Lausanne., 74(1), 158-164. https://doi.org/10.1016/j.porgcoat.2011.12.004
Džunuzović E, Tasić SV, Božić BR, Džunuzović J, Dunjić B, Jeremić KB. Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates. in Progress in Organic Coatings. 2012;74(1):158-164. doi:10.1016/j.porgcoat.2011.12.004 .
Džunuzović, Enis, Tasić, Srba V., Božić, Branislav R., Džunuzović, Jasna, Dunjić, Branko, Jeremić, Katarina B., "Mechanical and thermal properties of UV cured mixtures of linear and hyperbranched urethane acrylates" in Progress in Organic Coatings, 74, no. 1 (2012):158-164, https://doi.org/10.1016/j.porgcoat.2011.12.004 . .