Life extension of gears flank surfaces regenerated by hard facing
Нема приказа
Аутори
Marković, SvetislavMilović, Ljubica
Vrhovac, Miran
Lazović, Tatjana
Marinković, Aleksandar
Aleksić, Vujadin
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being regenerated by hard facing with subsequent cementation and quenching. The fatigue testing wider variable amplitude loading was used to determine the duration of operational life through measurement of wear. The obtained results demonstrated the impact of hard facing methods on gear endurance in operation. In the test on regenerated gears it was discovered that initial pits appeared almost simultaneously for different facing materials and a bit earlier than in tests on newly made ones, despite their considerably higher pitting rate. Apart from that, the tested operational lives of regenerated and newly-made gears were approximately equal and much longer than predicted.
Кључне речи:
tribological characteristics / reparatory hard facing / gears working lifeИзвор:
Metalurgia International, 2013, 18, 2, 81-85Издавач:
- Editura Stiintifica Fmr, Bucharest
Финансирање / пројекти:
- Интегритет опреме под притиском при истовременом деловању замарајућег оптерећења и температуре (RS-MESTD-Technological Development (TD or TR)-35011)
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Marković, Svetislav AU - Milović, Ljubica AU - Vrhovac, Miran AU - Lazović, Tatjana AU - Marinković, Aleksandar AU - Aleksić, Vujadin PY - 2013 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2272 AB - This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being regenerated by hard facing with subsequent cementation and quenching. The fatigue testing wider variable amplitude loading was used to determine the duration of operational life through measurement of wear. The obtained results demonstrated the impact of hard facing methods on gear endurance in operation. In the test on regenerated gears it was discovered that initial pits appeared almost simultaneously for different facing materials and a bit earlier than in tests on newly made ones, despite their considerably higher pitting rate. Apart from that, the tested operational lives of regenerated and newly-made gears were approximately equal and much longer than predicted. PB - Editura Stiintifica Fmr, Bucharest T2 - Metalurgia International T1 - Life extension of gears flank surfaces regenerated by hard facing EP - 85 IS - 2 SP - 81 VL - 18 UR - https://hdl.handle.net/21.15107/rcub_technorep_2272 ER -
@article{ author = "Marković, Svetislav and Milović, Ljubica and Vrhovac, Miran and Lazović, Tatjana and Marinković, Aleksandar and Aleksić, Vujadin", year = "2013", abstract = "This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being regenerated by hard facing with subsequent cementation and quenching. The fatigue testing wider variable amplitude loading was used to determine the duration of operational life through measurement of wear. The obtained results demonstrated the impact of hard facing methods on gear endurance in operation. In the test on regenerated gears it was discovered that initial pits appeared almost simultaneously for different facing materials and a bit earlier than in tests on newly made ones, despite their considerably higher pitting rate. Apart from that, the tested operational lives of regenerated and newly-made gears were approximately equal and much longer than predicted.", publisher = "Editura Stiintifica Fmr, Bucharest", journal = "Metalurgia International", title = "Life extension of gears flank surfaces regenerated by hard facing", pages = "85-81", number = "2", volume = "18", url = "https://hdl.handle.net/21.15107/rcub_technorep_2272" }
Marković, S., Milović, L., Vrhovac, M., Lazović, T., Marinković, A.,& Aleksić, V.. (2013). Life extension of gears flank surfaces regenerated by hard facing. in Metalurgia International Editura Stiintifica Fmr, Bucharest., 18(2), 81-85. https://hdl.handle.net/21.15107/rcub_technorep_2272
Marković S, Milović L, Vrhovac M, Lazović T, Marinković A, Aleksić V. Life extension of gears flank surfaces regenerated by hard facing. in Metalurgia International. 2013;18(2):81-85. https://hdl.handle.net/21.15107/rcub_technorep_2272 .
Marković, Svetislav, Milović, Ljubica, Vrhovac, Miran, Lazović, Tatjana, Marinković, Aleksandar, Aleksić, Vujadin, "Life extension of gears flank surfaces regenerated by hard facing" in Metalurgia International, 18, no. 2 (2013):81-85, https://hdl.handle.net/21.15107/rcub_technorep_2272 .