Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes
Samo za registrovane korisnike
2013
Autori
Marković, RadmilaStevanović, Jasmina
Gvozdenović, Milica
Jugović, Branimir
Grujić, Aleksandar
Nedeljković, Dragutin
Stajić-Trošić, Jasna
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The use of copper anodes with non standard content of impurities for the treatment of waste, sulphur acid solutions that came as a result of the industrial process of electrolytic copper refining was investigated. Those solutions contain the high content of copper, nickel and arsine, and because of that, the copper anodes with high content of Ni, Pb, Sn and Sb were prepared. Examination the effect of high impurities content as well as the influence of the solution temperature on the anodes behaviour during the electrolytic process under the conditions that are the same as the industrial was the aim of this work. Obtained results clearly indicate that tested anodes could be used for the refined during the electrorefining process. Dissolution of copper anodes was not stoppage after the first appearance of the passivation region for A1 and A2 anodes while appearance of passivation for A3 anode, for test duration of 72 h, was not registered. The start time of the first passivation appearan...ce is shorter in the case of the anode with high content of all impurities, anode A1. The first passivation occurrence was detected on higher temperature after about 29 h from the test starts. The change of chemical composition of electrolyte was monitored during electrolysis. Concentration of nickel in the working electrolyte at the end of process is increased and it corresponds to the Ni content in anodes. The copper and arsenic concentrations are decreased during the process. Arsenic passes into the anode slime, while the copper is deposited on the cathode and also passed in the slime. After the process is finished, obtained solution could be used for the nickel recover using the electrochemically or chemically methods.
Ključne reči:
soluble copper anodes / electrolytic refining / cathode copper / nickelIzvor:
International Journal of Electrochemical Science, 2013, 8, 5, 7357-7370Izdavač:
- Electrochemical Science Group, Beograd
Finansiranje / projekti:
- Elektrohemijska sinteza i karakterizacija nanostrukturiranih funkcionalnih materijala za primenu u novim tehnologijama (RS-MESTD-Basic Research (BR or ON)-172046)
- Uticaj rudarskog otpada iz RTB-a Bor na zagađenje vodotokova sa predlogom mera i postupaka za smanjenje štetnog dejstva na životnu sredinu (RS-MESTD-Technological Development (TD or TR)-37001)
- Razvoj opreme i procesa dobijanja polimernih kompozitnih materijala sa unapred definisanim funkcionalnim svojstvima (RS-MESTD-Technological Development (TD or TR)-34011)
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Marković, Radmila AU - Stevanović, Jasmina AU - Gvozdenović, Milica AU - Jugović, Branimir AU - Grujić, Aleksandar AU - Nedeljković, Dragutin AU - Stajić-Trošić, Jasna PY - 2013 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2281 AB - The use of copper anodes with non standard content of impurities for the treatment of waste, sulphur acid solutions that came as a result of the industrial process of electrolytic copper refining was investigated. Those solutions contain the high content of copper, nickel and arsine, and because of that, the copper anodes with high content of Ni, Pb, Sn and Sb were prepared. Examination the effect of high impurities content as well as the influence of the solution temperature on the anodes behaviour during the electrolytic process under the conditions that are the same as the industrial was the aim of this work. Obtained results clearly indicate that tested anodes could be used for the refined during the electrorefining process. Dissolution of copper anodes was not stoppage after the first appearance of the passivation region for A1 and A2 anodes while appearance of passivation for A3 anode, for test duration of 72 h, was not registered. The start time of the first passivation appearance is shorter in the case of the anode with high content of all impurities, anode A1. The first passivation occurrence was detected on higher temperature after about 29 h from the test starts. The change of chemical composition of electrolyte was monitored during electrolysis. Concentration of nickel in the working electrolyte at the end of process is increased and it corresponds to the Ni content in anodes. The copper and arsenic concentrations are decreased during the process. Arsenic passes into the anode slime, while the copper is deposited on the cathode and also passed in the slime. After the process is finished, obtained solution could be used for the nickel recover using the electrochemically or chemically methods. PB - Electrochemical Science Group, Beograd T2 - International Journal of Electrochemical Science T1 - Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes EP - 7370 IS - 5 SP - 7357 VL - 8 UR - https://hdl.handle.net/21.15107/rcub_technorep_2281 ER -
@article{ author = "Marković, Radmila and Stevanović, Jasmina and Gvozdenović, Milica and Jugović, Branimir and Grujić, Aleksandar and Nedeljković, Dragutin and Stajić-Trošić, Jasna", year = "2013", abstract = "The use of copper anodes with non standard content of impurities for the treatment of waste, sulphur acid solutions that came as a result of the industrial process of electrolytic copper refining was investigated. Those solutions contain the high content of copper, nickel and arsine, and because of that, the copper anodes with high content of Ni, Pb, Sn and Sb were prepared. Examination the effect of high impurities content as well as the influence of the solution temperature on the anodes behaviour during the electrolytic process under the conditions that are the same as the industrial was the aim of this work. Obtained results clearly indicate that tested anodes could be used for the refined during the electrorefining process. Dissolution of copper anodes was not stoppage after the first appearance of the passivation region for A1 and A2 anodes while appearance of passivation for A3 anode, for test duration of 72 h, was not registered. The start time of the first passivation appearance is shorter in the case of the anode with high content of all impurities, anode A1. The first passivation occurrence was detected on higher temperature after about 29 h from the test starts. The change of chemical composition of electrolyte was monitored during electrolysis. Concentration of nickel in the working electrolyte at the end of process is increased and it corresponds to the Ni content in anodes. The copper and arsenic concentrations are decreased during the process. Arsenic passes into the anode slime, while the copper is deposited on the cathode and also passed in the slime. After the process is finished, obtained solution could be used for the nickel recover using the electrochemically or chemically methods.", publisher = "Electrochemical Science Group, Beograd", journal = "International Journal of Electrochemical Science", title = "Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes", pages = "7370-7357", number = "5", volume = "8", url = "https://hdl.handle.net/21.15107/rcub_technorep_2281" }
Marković, R., Stevanović, J., Gvozdenović, M., Jugović, B., Grujić, A., Nedeljković, D.,& Stajić-Trošić, J.. (2013). Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes. in International Journal of Electrochemical Science Electrochemical Science Group, Beograd., 8(5), 7357-7370. https://hdl.handle.net/21.15107/rcub_technorep_2281
Marković R, Stevanović J, Gvozdenović M, Jugović B, Grujić A, Nedeljković D, Stajić-Trošić J. Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes. in International Journal of Electrochemical Science. 2013;8(5):7357-7370. https://hdl.handle.net/21.15107/rcub_technorep_2281 .
Marković, Radmila, Stevanović, Jasmina, Gvozdenović, Milica, Jugović, Branimir, Grujić, Aleksandar, Nedeljković, Dragutin, Stajić-Trošić, Jasna, "Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes" in International Journal of Electrochemical Science, 8, no. 5 (2013):7357-7370, https://hdl.handle.net/21.15107/rcub_technorep_2281 .