TechnoRep - Репозиторијум Технолошко-металуршког факултета
Универзитет у Београду, Технолошко-металуршки факултет
    • English
    • Српски
    • Српски (Serbia)
  • Српски (ћирилица) 
    • Енглески
    • Српски (ћирилица)
    • Српски (латиница)
  • Пријава
Преглед записа 
  •   TechnoRep
  • Tehnološko-metalurški fakultet
  • Radovi istraživača / Researchers’ publications (TMF)
  • Преглед записа
  •   TechnoRep
  • Tehnološko-metalurški fakultet
  • Radovi istraživača / Researchers’ publications (TMF)
  • Преглед записа
JavaScript is disabled for your browser. Some features of this site may not work without it.

Particle velocities in quasi two-dimensional water fluidized beds of spherical particles

Само за регистроване кориснике
2013
Аутори
Đuriš, Mihal
Kaluđerović-Radoičić, Tatjana
Garić-Grulović, Radmila
Arsenijević, Zorana
Grbavčić, Željko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документу
Апстракт
Particle velocities have been measured in two-dimensional water fluidized beds of mono-sized spherical glass particles d(p) = 1.94, 2.98, 4.00 and 6.00 mm in diameter. For each particle size, a separate column was constructed in a manner that the column thickness corresponded to approximately 3 particle diameters. A large number of observations are required to obtain a stable value of total particle speed. The presented data indicated that in order to obtain a stable value of the mean total particle speed, a minimum of 4000 data points was needed. The distribution of total particle speeds follows the Maxwell distribution quite well. The effect of water velocity on the distribution function was similar to the effect of temperature on molecular speed distribution in the kinetic theory. The distribution of vertical and horizontal particle velocity components followed approximately a modified Gaussian distribution. A correlation for predicting the total mean particle speed in 2D water flui...dized beds is proposed. The mean absolute deviation between the experimental and measured particle velocities for the present data is 11.0%. The proposed correlation predicts the data of Carlos and Richardson [5] and Latif and Richardson [6] for 3D fluidized beds reasonably well.

Кључне речи:
Fluidization / Liquid-solids / Particle velocity
Извор:
Powder Technology, 2013, 246, 98-107
Издавач:
  • Elsevier, Amsterdam
Финансирање / пројекти:
  • Развој ефикаснијих хемијско-инжењерских процеса заснован на истраживањима феномена преноса и принципима интензификације процеса (RS-172022)

DOI: 10.1016/j.powtec.2013.05.009

ISSN: 0032-5910

WoS: 000324083000012

Scopus: 2-s2.0-84878930680
[ Google Scholar ]
8
7
URI
http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2436
Колекције
  • Radovi istraživača / Researchers’ publications (TMF)
Институција/група
Tehnološko-metalurški fakultet
TY  - JOUR
AU  - Đuriš, Mihal
AU  - Kaluđerović-Radoičić, Tatjana
AU  - Garić-Grulović, Radmila
AU  - Arsenijević, Zorana
AU  - Grbavčić, Željko
PY  - 2013
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2436
AB  - Particle velocities have been measured in two-dimensional water fluidized beds of mono-sized spherical glass particles d(p) = 1.94, 2.98, 4.00 and 6.00 mm in diameter. For each particle size, a separate column was constructed in a manner that the column thickness corresponded to approximately 3 particle diameters. A large number of observations are required to obtain a stable value of total particle speed. The presented data indicated that in order to obtain a stable value of the mean total particle speed, a minimum of 4000 data points was needed. The distribution of total particle speeds follows the Maxwell distribution quite well. The effect of water velocity on the distribution function was similar to the effect of temperature on molecular speed distribution in the kinetic theory. The distribution of vertical and horizontal particle velocity components followed approximately a modified Gaussian distribution. A correlation for predicting the total mean particle speed in 2D water fluidized beds is proposed. The mean absolute deviation between the experimental and measured particle velocities for the present data is 11.0%. The proposed correlation predicts the data of Carlos and Richardson [5] and Latif and Richardson [6] for 3D fluidized beds reasonably well.
PB  - Elsevier, Amsterdam
T2  - Powder Technology
T1  - Particle velocities in quasi two-dimensional water fluidized beds of spherical particles
EP  - 107
SP  - 98
VL  - 246
DO  - 10.1016/j.powtec.2013.05.009
ER  - 
@article{
author = "Đuriš, Mihal and Kaluđerović-Radoičić, Tatjana and Garić-Grulović, Radmila and Arsenijević, Zorana and Grbavčić, Željko",
year = "2013",
abstract = "Particle velocities have been measured in two-dimensional water fluidized beds of mono-sized spherical glass particles d(p) = 1.94, 2.98, 4.00 and 6.00 mm in diameter. For each particle size, a separate column was constructed in a manner that the column thickness corresponded to approximately 3 particle diameters. A large number of observations are required to obtain a stable value of total particle speed. The presented data indicated that in order to obtain a stable value of the mean total particle speed, a minimum of 4000 data points was needed. The distribution of total particle speeds follows the Maxwell distribution quite well. The effect of water velocity on the distribution function was similar to the effect of temperature on molecular speed distribution in the kinetic theory. The distribution of vertical and horizontal particle velocity components followed approximately a modified Gaussian distribution. A correlation for predicting the total mean particle speed in 2D water fluidized beds is proposed. The mean absolute deviation between the experimental and measured particle velocities for the present data is 11.0%. The proposed correlation predicts the data of Carlos and Richardson [5] and Latif and Richardson [6] for 3D fluidized beds reasonably well.",
publisher = "Elsevier, Amsterdam",
journal = "Powder Technology",
title = "Particle velocities in quasi two-dimensional water fluidized beds of spherical particles",
pages = "107-98",
volume = "246",
doi = "10.1016/j.powtec.2013.05.009"
}
Đuriš, M., Kaluđerović-Radoičić, T., Garić-Grulović, R., Arsenijević, Z.,& Grbavčić, Ž.. (2013). Particle velocities in quasi two-dimensional water fluidized beds of spherical particles. in Powder Technology
Elsevier, Amsterdam., 246, 98-107.
https://doi.org/10.1016/j.powtec.2013.05.009
Đuriš M, Kaluđerović-Radoičić T, Garić-Grulović R, Arsenijević Z, Grbavčić Ž. Particle velocities in quasi two-dimensional water fluidized beds of spherical particles. in Powder Technology. 2013;246:98-107.
doi:10.1016/j.powtec.2013.05.009 .
Đuriš, Mihal, Kaluđerović-Radoičić, Tatjana, Garić-Grulović, Radmila, Arsenijević, Zorana, Grbavčić, Željko, "Particle velocities in quasi two-dimensional water fluidized beds of spherical particles" in Powder Technology, 246 (2013):98-107,
https://doi.org/10.1016/j.powtec.2013.05.009 . .

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму TechnoRep | Пошаљите запажања

OpenAIRERCUB
 

 

Комплетан репозиторијумИнституције/групеАуториНасловиТемеОва институцијаАуториНасловиТеме

Статистика

Преглед статистика

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму TechnoRep | Пошаљите запажања

OpenAIRERCUB