Претраживање
Приказ резултата 21-30 од 101
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Obtaining of nanostructured powders for production of new dispersion strengthened sintered material in the system Cu-Al2O3 / Dobijanje nanostrukturnih prahova u cilju proizvodnje novih disperzno ojačanih sinterovanih materijala u sistemu Cu-Al2O3
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2009)
This PhD thesis presents the possibility of nanostructured composite materials based on copper and alumina synthesis trough a new method, which is a combination of thermo-chemical synthesis and mechanical alloying. ...
Optimization of enzyme production of fatty acid methyl esters / Razvoj enzimskog postupka za sintezu metil estara masnih kiselina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2014)
Тhis thesis deals with the transesterification of sunflower oil in the solvent-free system. The catalytic activity of lipases from different sources (Candida rugosa, Rhizomucor miehei, Candida antarctica) has been examined ...
Production and application of bioactive proteins and peptides from whey / Proizvodnja i primena bioaktivnih proteina i peptida surutke
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
Bioactive peptides are a rapidly developing field of research. During the research it was observed that some peptides which do not show a particular bioactivity become bioactive after ingestion and passing through the ...
Application of supercritical carbon dioxide in fabrication of materials with repellent properties based on pyrethrins / Primena natkritičnog ugljenik(IV)-oksida za dobijanje materijala sa repelentnim svojstvima na bazi piretrina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
This PhD thesis was aimed to investigate the possibility of supercritical solvent impregnation (SSI) of selected polymer materials (cotton fabric, polypropylene (PP) non-woven fabric, polyamide (PA) polymers (fabric, ...
Micromechanical properties and thermal stability of adhesives for optical fibers based on ethylene-vinyl acetate copolymer / Mikromehanička svojstva i termička stabilnost adheziva za optička vlakna na bazi kopolimera etilena i vinil-acetata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
Optical fibers are used for transfer of information when the reliable system was required, and in some situations it is necessary to transport optical fibers on the drums and to enable controlled and fast unwinding from ...
Stabilization and solidification process of hazardous sludge generated during wastewater treatment process / Proces stabilizacije i solidifikacije opasnog mulja obrazovanog nakon tretmana otpadne vode u primarnoj metalurgiji bakra
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Stabilization and solidification process is considered to be the best available technique for the treatment of industrial waste sludge and solid waste. This PhD thesis presents investigations of development and optimization ...
Removal of textile dyes from water by photocatalytic degradation in the presence of titanium dioxide nanoparticles immobilized onto chitosan and alginate based hydrogels. / Uklanjanje boja za tekstil iz vode fotokatalitičkom degradacijom u prisustvu nanočestica titan-dioksida imobilisanih na hidrogelove hitozana i alginata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
The aim of this Ph.D. thesis was to investigate the possibility of immobilization of titanium dioxide (TiO2) nanoparticles onto/into hydrogels as carriers, as well as the photodegradation of textile dyes from aqueous ...
Synthesis and characterisation of hybrid polymer composite materials based on wood. / Sinteza i karakterizacija hibridnih polimernih kompozita na bazi drveta
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2019)
The focus of this doctoral dissertation is the preparation and characterization of wood-plastic composites (WPC), whereby a new method of obtaining hybrid polymer composites based on wood from solution and forming the final ...
Preparation of biologically active polyphenols by utilising the primrose (Primula veris), the horsetail (Equisetum arvense) and the yarrow (Achillea millefolium) processing waste. / Iskoričćenje otpada iz prerade jagorčevine (Primula veris), rastavića (Equisetum arvense) i hajdučke trave (Achillea millefolium) za dobijanje biološki aktivnih polifenola
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
The subject of this dissertation is the utilization of waste materials from the processing of primrose (Primula veris), horsetail (Equisetum arvense) and yarrow (Achillea millefolium) for obtaining biologically active and ...