Prikaz osnovnih podataka o dokumentu

dc.creatorIvaniš, Gorica
dc.creatorTasić, Aleksandar Ž.
dc.creatorRadović, Ivona
dc.creatorĐorđević, Bojan D.
dc.creatorŠerbanović, Slobodan P.
dc.creatorKijevčanin, Mirjana
dc.date.accessioned2021-03-10T12:51:12Z
dc.date.available2021-03-10T12:51:12Z
dc.date.issued2015
dc.identifier.issn0352-5139
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/3083
dc.description.abstractDensities data of n-hexane, toluene and dichloromethane at temperatures 288.15-413.15 K and at pressures 0.1-60 MPa, determined in a previous article, were fitted to the modified Tait equation of state. The fitted temperature-pressure dependent density data were used to calculate the following derived properties: the isothermal compressibility, the isobaric thermal expansivity, the difference between specific heat capacity at constant pressure and at constant volume and the internal pressure, over the entire temperature and pressure intervals specified above. In order to assess the proposed modeling procedure, the obtained values for the isothermal compressibility and the isobaric thermal expansivity were compared with the corresponding literature data. The average absolute percentage deviations for the isothermal compressibility were for n-hexane 2.01-3.64 %, for toluene 0.64-2.48 % and for dichloromethane 1.81-3.20 %, and for the isobaric thermal expansivity, they were for n-hexane 1.31-4.17 %, for toluene 0.71-2.45 % and for dichloromethane 1.16-1.61 %. By comparing the obtained deviations values with those found in the literature, it could be concluded that the presented results agree well with the literature data.en
dc.publisherSrpsko hemijsko društvo, Beograd
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172063/RS//
dc.relationFaculty of Technology and Metallurgy, University of Belgrade
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceJournal of the Serbian Chemical Society
dc.subjecthigh pressureen
dc.subjectisobaric thermal expansivityen
dc.subjectisothermal compressibilityen
dc.subjectn-hexaneen
dc.subjecttolueneen
dc.subjectdichloromethaneen
dc.titleModeling of density and calculations of derived volumetric properties for n-hexane, toluene and dichloromethane at pressures 0.1-60 MPa and temperatures 288.15-413.15 Ken
dc.typearticle
dc.rights.licenseBY-NC-ND
dc.citation.epage+
dc.citation.issue11
dc.citation.other80(11): 1423-+
dc.citation.rankM23
dc.citation.spage1423
dc.citation.volume80
dc.identifier.doi10.2298/JSC150318062I
dc.identifier.fulltexthttp://TechnoRep.tmf.bg.ac.rs/bitstream/id/1091/3080.pdf
dc.identifier.scopus2-s2.0-84957568228
dc.identifier.wos000366585800008
dc.type.versionpublishedVersion


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu