Pulsed laser deposition method for fabrication of cds/tio2 and pbs photoelectrodes for solar energy application
2015
Аутори
Bjelajac, AnđelikaĐokić, Veljko
Petrović, Rada
Stan, George E.
Socol, Gabriel
Popescu-Pelin, G.
Mihailescu, Ion N.
Janaćković, Đorđe
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Titanium films sputtered on FTO glass were used for obtaining highly oriented titania nanotubes via anodization technique. Then, pulsed laser deposition of CdS was carried out for sensitizing of similar to 60 nm wide titania nanotubes by applying 50, 100, 150 or 200 subsequent laser pulses. Scanning electron microscopy was used to indicate which samples had the open nanotubular structure of titania preserved after the deposition of CdS. Energy dispersive spectroscopy showed that a higher number of applied laser pulses results in the increase of Cd and S quantity within samples. Pulsed laser deposition technique was also employed for the fabrication of PbS counter electrode. I-V characteristics of the photovoltaic cells consisting the obtained electrodes were measured and compared under one-sun illumination. The photovoltaic cell with photoanode sensitized with CdS by applying 150 laser pulses showed the highest current density and voltage among the investigated cell.
Кључне речи:
Nanostructuring / Photoelectrode / Pulsed laser deposition / Electron microscopy studies / SputteringИзвор:
Digest Journal of Nanomaterials and Biostructures, 2015, 10, 4, 1411-1418Издавач:
- Inst Materials Physics, Bucharest
Финансирање / пројекти:
- Синтеза, развој технологија добијања и примена наноструктурних мултифункционалних материјала дефинисаних својстава (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45019)
- UEFISCDI [304/2011]
- Core ProgrammeLuxembourg National Research Fund [PN09-45010]
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Bjelajac, Anđelika AU - Đokić, Veljko AU - Petrović, Rada AU - Stan, George E. AU - Socol, Gabriel AU - Popescu-Pelin, G. AU - Mihailescu, Ion N. AU - Janaćković, Đorđe PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3086 AB - Titanium films sputtered on FTO glass were used for obtaining highly oriented titania nanotubes via anodization technique. Then, pulsed laser deposition of CdS was carried out for sensitizing of similar to 60 nm wide titania nanotubes by applying 50, 100, 150 or 200 subsequent laser pulses. Scanning electron microscopy was used to indicate which samples had the open nanotubular structure of titania preserved after the deposition of CdS. Energy dispersive spectroscopy showed that a higher number of applied laser pulses results in the increase of Cd and S quantity within samples. Pulsed laser deposition technique was also employed for the fabrication of PbS counter electrode. I-V characteristics of the photovoltaic cells consisting the obtained electrodes were measured and compared under one-sun illumination. The photovoltaic cell with photoanode sensitized with CdS by applying 150 laser pulses showed the highest current density and voltage among the investigated cell. PB - Inst Materials Physics, Bucharest T2 - Digest Journal of Nanomaterials and Biostructures T1 - Pulsed laser deposition method for fabrication of cds/tio2 and pbs photoelectrodes for solar energy application EP - 1418 IS - 4 SP - 1411 VL - 10 UR - https://hdl.handle.net/21.15107/rcub_technorep_3086 ER -
@article{ author = "Bjelajac, Anđelika and Đokić, Veljko and Petrović, Rada and Stan, George E. and Socol, Gabriel and Popescu-Pelin, G. and Mihailescu, Ion N. and Janaćković, Đorđe", year = "2015", abstract = "Titanium films sputtered on FTO glass were used for obtaining highly oriented titania nanotubes via anodization technique. Then, pulsed laser deposition of CdS was carried out for sensitizing of similar to 60 nm wide titania nanotubes by applying 50, 100, 150 or 200 subsequent laser pulses. Scanning electron microscopy was used to indicate which samples had the open nanotubular structure of titania preserved after the deposition of CdS. Energy dispersive spectroscopy showed that a higher number of applied laser pulses results in the increase of Cd and S quantity within samples. Pulsed laser deposition technique was also employed for the fabrication of PbS counter electrode. I-V characteristics of the photovoltaic cells consisting the obtained electrodes were measured and compared under one-sun illumination. The photovoltaic cell with photoanode sensitized with CdS by applying 150 laser pulses showed the highest current density and voltage among the investigated cell.", publisher = "Inst Materials Physics, Bucharest", journal = "Digest Journal of Nanomaterials and Biostructures", title = "Pulsed laser deposition method for fabrication of cds/tio2 and pbs photoelectrodes for solar energy application", pages = "1418-1411", number = "4", volume = "10", url = "https://hdl.handle.net/21.15107/rcub_technorep_3086" }
Bjelajac, A., Đokić, V., Petrović, R., Stan, G. E., Socol, G., Popescu-Pelin, G., Mihailescu, I. N.,& Janaćković, Đ.. (2015). Pulsed laser deposition method for fabrication of cds/tio2 and pbs photoelectrodes for solar energy application. in Digest Journal of Nanomaterials and Biostructures Inst Materials Physics, Bucharest., 10(4), 1411-1418. https://hdl.handle.net/21.15107/rcub_technorep_3086
Bjelajac A, Đokić V, Petrović R, Stan GE, Socol G, Popescu-Pelin G, Mihailescu IN, Janaćković Đ. Pulsed laser deposition method for fabrication of cds/tio2 and pbs photoelectrodes for solar energy application. in Digest Journal of Nanomaterials and Biostructures. 2015;10(4):1411-1418. https://hdl.handle.net/21.15107/rcub_technorep_3086 .
Bjelajac, Anđelika, Đokić, Veljko, Petrović, Rada, Stan, George E., Socol, Gabriel, Popescu-Pelin, G., Mihailescu, Ion N., Janaćković, Đorđe, "Pulsed laser deposition method for fabrication of cds/tio2 and pbs photoelectrodes for solar energy application" in Digest Journal of Nanomaterials and Biostructures, 10, no. 4 (2015):1411-1418, https://hdl.handle.net/21.15107/rcub_technorep_3086 .