Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.
TY - JOUR
AU - Martinović, Sanja
AU - Vlahović, Milica
AU - Stević, Zoran
AU - Volkov-Husović, Tatjana
PY - 2015
UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3109
AB - Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.
PB - Elsevier Sci Ltd, Oxford
T2 - Engineering Structures
T1 - Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete
EP - 467
SP - 462
VL - 99
DO - 10.1016/j.engstruct.2015.05.020
ER -
@article{
author = "Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2015",
abstract = "Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Engineering Structures",
title = "Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete",
pages = "467-462",
volume = "99",
doi = "10.1016/j.engstruct.2015.05.020"
}
Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2015). Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete. in Engineering Structures
Elsevier Sci Ltd, Oxford., 99, 462-467.
https://doi.org/10.1016/j.engstruct.2015.05.020
Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete. in Engineering Structures. 2015;99:462-467.
doi:10.1016/j.engstruct.2015.05.020 .
Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete" in Engineering Structures, 99 (2015):462-467,
https://doi.org/10.1016/j.engstruct.2015.05.020 . .
