Приказ основних података о документу

Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete

dc.creatorMartinović, Sanja
dc.creatorVlahović, Milica
dc.creatorStević, Zoran
dc.creatorVolkov-Husović, Tatjana
dc.date.accessioned2021-03-10T12:52:55Z
dc.date.available2021-03-10T12:52:55Z
dc.date.issued2015
dc.identifier.issn0141-0296
dc.identifier.urihttp://TechnoRep.tmf.bg.ac.rs/handle/123456789/3109
dc.description.abstractLow level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.en
dc.publisherElsevier Sci Ltd, Oxford
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/33007/RS//
dc.rightsrestrictedAccess
dc.sourceEngineering Structures
dc.subjectLow level laser (LLL)en
dc.subjectLaser destructionen
dc.subjectMechanical comparatoren
dc.subjectImage analysisen
dc.subjectDamages sizeen
dc.subjectRefractory concreteen
dc.titleInfluence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concreteen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage467
dc.citation.other99: 462-467
dc.citation.rankM21
dc.citation.spage462
dc.citation.volume99
dc.identifier.doi10.1016/j.engstruct.2015.05.020
dc.identifier.scopus2-s2.0-84930209265
dc.identifier.wos000359171900037
dc.type.versionpublishedVersion


Документи

Thumbnail
Име:
3106.pdf
Величина:
1.247Mb
Формат:
PDF
Отварање

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу