A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA)
Само за регистроване кориснике
2016
Аутори
Tomić, NatašaMeđo, Bojan
Stojanović, Dušica
Radojević, Vesna
Rakin, Marko
Jančić-Heinemann, Radmila
Aleksić, Radoslav
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Optical fibers are transported on a drum and on some occasions it is essential to fix them and to keep them fixed to the drum. Adhesives are used in such situations to obtain the best and durable fixation. This research shows a new approach for the examination of the adhesion effects and forces between the optical fibers and the adhesive during a tensile test. A solution of ethylene-vinyl acetate (EVA) copolymer in toluene was used as the adhesive for optical fibers and applied using specially designed apparatus. The testing procedure consisted of optical fiber characterization using optical microscopy for measurement of geomertrical parameters; tensile test to obtain the strength of adhesion that keeps the fibers together; nanoindentation of the optical final layer; SEM for precise geometry measurements and insight in the adhesive aspect after the test, and FOR analysis to find out the chemical composition of polymer protective coating to have an obtain information about chemical envi...ronment for the adhesive. The optical fiber with outstanding mechanical characteristics was used to examine adhesives. A sample of two fibers connected with EVA was subjected to the tensile test to examine the adhesion forces. Finite element modeling was used to simulate the behavior and stress distribution of the adhesion layer. This method could assist in reaching a conclusion about the quality of the adhesion obtained in an experimental procedure.
Кључне речи:
Fibers / Mechanical properties of adhesives / Finite element stress analysisИзвор:
International Journal of Adhesion and Adhesives, 2016, 68, 341-350Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
- Развој опреме и процеса добијања полимерних композитних материјала са унапред дефинисаним функционалним својствима (RS-MESTD-Technological Development (TD or TR)-34011)
- Микромеханички критеријуми оштећења и лома (RS-MESTD-Basic Research (BR or ON)-174004)
DOI: 10.1016/j.ijadhadh.2016.04.012
ISSN: 0143-7496
WoS: 000378470400039
Scopus: 2-s2.0-84965164945
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Tomić, Nataša AU - Međo, Bojan AU - Stojanović, Dušica AU - Radojević, Vesna AU - Rakin, Marko AU - Jančić-Heinemann, Radmila AU - Aleksić, Radoslav PY - 2016 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3267 AB - Optical fibers are transported on a drum and on some occasions it is essential to fix them and to keep them fixed to the drum. Adhesives are used in such situations to obtain the best and durable fixation. This research shows a new approach for the examination of the adhesion effects and forces between the optical fibers and the adhesive during a tensile test. A solution of ethylene-vinyl acetate (EVA) copolymer in toluene was used as the adhesive for optical fibers and applied using specially designed apparatus. The testing procedure consisted of optical fiber characterization using optical microscopy for measurement of geomertrical parameters; tensile test to obtain the strength of adhesion that keeps the fibers together; nanoindentation of the optical final layer; SEM for precise geometry measurements and insight in the adhesive aspect after the test, and FOR analysis to find out the chemical composition of polymer protective coating to have an obtain information about chemical environment for the adhesive. The optical fiber with outstanding mechanical characteristics was used to examine adhesives. A sample of two fibers connected with EVA was subjected to the tensile test to examine the adhesion forces. Finite element modeling was used to simulate the behavior and stress distribution of the adhesion layer. This method could assist in reaching a conclusion about the quality of the adhesion obtained in an experimental procedure. PB - Elsevier Sci Ltd, Oxford T2 - International Journal of Adhesion and Adhesives T1 - A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA) EP - 350 SP - 341 VL - 68 DO - 10.1016/j.ijadhadh.2016.04.012 ER -
@article{ author = "Tomić, Nataša and Međo, Bojan and Stojanović, Dušica and Radojević, Vesna and Rakin, Marko and Jančić-Heinemann, Radmila and Aleksić, Radoslav", year = "2016", abstract = "Optical fibers are transported on a drum and on some occasions it is essential to fix them and to keep them fixed to the drum. Adhesives are used in such situations to obtain the best and durable fixation. This research shows a new approach for the examination of the adhesion effects and forces between the optical fibers and the adhesive during a tensile test. A solution of ethylene-vinyl acetate (EVA) copolymer in toluene was used as the adhesive for optical fibers and applied using specially designed apparatus. The testing procedure consisted of optical fiber characterization using optical microscopy for measurement of geomertrical parameters; tensile test to obtain the strength of adhesion that keeps the fibers together; nanoindentation of the optical final layer; SEM for precise geometry measurements and insight in the adhesive aspect after the test, and FOR analysis to find out the chemical composition of polymer protective coating to have an obtain information about chemical environment for the adhesive. The optical fiber with outstanding mechanical characteristics was used to examine adhesives. A sample of two fibers connected with EVA was subjected to the tensile test to examine the adhesion forces. Finite element modeling was used to simulate the behavior and stress distribution of the adhesion layer. This method could assist in reaching a conclusion about the quality of the adhesion obtained in an experimental procedure.", publisher = "Elsevier Sci Ltd, Oxford", journal = "International Journal of Adhesion and Adhesives", title = "A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA)", pages = "350-341", volume = "68", doi = "10.1016/j.ijadhadh.2016.04.012" }
Tomić, N., Međo, B., Stojanović, D., Radojević, V., Rakin, M., Jančić-Heinemann, R.,& Aleksić, R.. (2016). A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA). in International Journal of Adhesion and Adhesives Elsevier Sci Ltd, Oxford., 68, 341-350. https://doi.org/10.1016/j.ijadhadh.2016.04.012
Tomić N, Međo B, Stojanović D, Radojević V, Rakin M, Jančić-Heinemann R, Aleksić R. A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA). in International Journal of Adhesion and Adhesives. 2016;68:341-350. doi:10.1016/j.ijadhadh.2016.04.012 .
Tomić, Nataša, Međo, Bojan, Stojanović, Dušica, Radojević, Vesna, Rakin, Marko, Jančić-Heinemann, Radmila, Aleksić, Radoslav, "A rapid test to measure adhesion between optical fibers and ethylene-vinyl acetate copolymer (EVA)" in International Journal of Adhesion and Adhesives, 68 (2016):341-350, https://doi.org/10.1016/j.ijadhadh.2016.04.012 . .