Monolithic nanocrystalline SiC ceramics
Samo za registrovane korisnike
2016
Autori
Matović, Branko![](/themes/MirageTechnoRep/images/orcid.png)
Bučevac, Dušan
![](/themes/MirageTechnoRep/images/orcid.png)
Urbanović, Vladimir
Stanković, Nadežda
![](/themes/MirageTechnoRep/images/orcid.png)
Daneu, Nina
Volkov-Husović, Tatjana
![](/themes/MirageTechnoRep/images/orcid.png)
Babić, Biljana M.
Članak u časopisu (Objavljena verzija)
![](/themes/MirageTechnoRep//images/creativecommons/arr.png)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Additive-free beta-SiC nanopowders were densified by using high-pressure "anvil-type with hollows" apparatus at the pressure of 4 GPa in the range of 1500-1900 degrees C. The starting powder with average particle size of 10 nm was synthesized by a sol-gel process. Crystallite size and lattice parameters of the samples have been studied at room temperature by X-ray diffraction (XRD) and transmission electron microscopy (TEM). It was found that the size of the crystallites gradually increases from 16 to 51 nm with increasing sintering temperature (1500 to 1900 degrees C). Fully densified sample ( gt 99%) was obtained at a sintering temperature of 1900 degrees C for 60 s. This sample exhibits nano-hardness and Young's modulus of elasticity of 35 GPa and 450 GPa, respectively. Modified vibratory cavitation test method was used for laboratory testing of the cavitation resistance. A very low erosion level with mass loss 0.1% after 10 h was exhibited during the cavitation test.
Ključne reči:
SiC / High-pressure densification / Balk nanomaterial / Microstructure / Mechanical propertiesIzvor:
Journal of the European Ceramic Society, 2016, 36, 12, 3005-3010Izdavač:
- Elsevier Sci Ltd, Oxford
Finansiranje / projekti:
- Ministry of Science of SerbiaMinistry of Science, Serbia [12405]
- Serbia-Slovenia bilateral project
DOI: 10.1016/j.jeurceramsoc.2015.10.031
ISSN: 0955-2219
WoS: 000378362800020
Scopus: 2-s2.0-84992309574
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Matović, Branko AU - Bučevac, Dušan AU - Urbanović, Vladimir AU - Stanković, Nadežda AU - Daneu, Nina AU - Volkov-Husović, Tatjana AU - Babić, Biljana M. PY - 2016 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3432 AB - Additive-free beta-SiC nanopowders were densified by using high-pressure "anvil-type with hollows" apparatus at the pressure of 4 GPa in the range of 1500-1900 degrees C. The starting powder with average particle size of 10 nm was synthesized by a sol-gel process. Crystallite size and lattice parameters of the samples have been studied at room temperature by X-ray diffraction (XRD) and transmission electron microscopy (TEM). It was found that the size of the crystallites gradually increases from 16 to 51 nm with increasing sintering temperature (1500 to 1900 degrees C). Fully densified sample ( gt 99%) was obtained at a sintering temperature of 1900 degrees C for 60 s. This sample exhibits nano-hardness and Young's modulus of elasticity of 35 GPa and 450 GPa, respectively. Modified vibratory cavitation test method was used for laboratory testing of the cavitation resistance. A very low erosion level with mass loss 0.1% after 10 h was exhibited during the cavitation test. PB - Elsevier Sci Ltd, Oxford T2 - Journal of the European Ceramic Society T1 - Monolithic nanocrystalline SiC ceramics EP - 3010 IS - 12 SP - 3005 VL - 36 DO - 10.1016/j.jeurceramsoc.2015.10.031 ER -
@article{ author = "Matović, Branko and Bučevac, Dušan and Urbanović, Vladimir and Stanković, Nadežda and Daneu, Nina and Volkov-Husović, Tatjana and Babić, Biljana M.", year = "2016", abstract = "Additive-free beta-SiC nanopowders were densified by using high-pressure "anvil-type with hollows" apparatus at the pressure of 4 GPa in the range of 1500-1900 degrees C. The starting powder with average particle size of 10 nm was synthesized by a sol-gel process. Crystallite size and lattice parameters of the samples have been studied at room temperature by X-ray diffraction (XRD) and transmission electron microscopy (TEM). It was found that the size of the crystallites gradually increases from 16 to 51 nm with increasing sintering temperature (1500 to 1900 degrees C). Fully densified sample ( gt 99%) was obtained at a sintering temperature of 1900 degrees C for 60 s. This sample exhibits nano-hardness and Young's modulus of elasticity of 35 GPa and 450 GPa, respectively. Modified vibratory cavitation test method was used for laboratory testing of the cavitation resistance. A very low erosion level with mass loss 0.1% after 10 h was exhibited during the cavitation test.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Journal of the European Ceramic Society", title = "Monolithic nanocrystalline SiC ceramics", pages = "3010-3005", number = "12", volume = "36", doi = "10.1016/j.jeurceramsoc.2015.10.031" }
Matović, B., Bučevac, D., Urbanović, V., Stanković, N., Daneu, N., Volkov-Husović, T.,& Babić, B. M.. (2016). Monolithic nanocrystalline SiC ceramics. in Journal of the European Ceramic Society Elsevier Sci Ltd, Oxford., 36(12), 3005-3010. https://doi.org/10.1016/j.jeurceramsoc.2015.10.031
Matović B, Bučevac D, Urbanović V, Stanković N, Daneu N, Volkov-Husović T, Babić BM. Monolithic nanocrystalline SiC ceramics. in Journal of the European Ceramic Society. 2016;36(12):3005-3010. doi:10.1016/j.jeurceramsoc.2015.10.031 .
Matović, Branko, Bučevac, Dušan, Urbanović, Vladimir, Stanković, Nadežda, Daneu, Nina, Volkov-Husović, Tatjana, Babić, Biljana M., "Monolithic nanocrystalline SiC ceramics" in Journal of the European Ceramic Society, 36, no. 12 (2016):3005-3010, https://doi.org/10.1016/j.jeurceramsoc.2015.10.031 . .