Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
Apstrakt
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the material is done at different rotating speeds. A 3-D finite element model for thermomechanical simulation is developed. It is based on arbitrary Lagrangian-Eulerian formulation, and Johnson-Cook material law is used for modelling of material behaviour. From comparison of the numerical results for alloys 2024 T3 and 2024 T351, it can be seen that the former has more intensive heat generation from the plastic deformation, due to its higher strength. Friction heat generation is only slightly dfferent for the two alloys. Therefore, temperatures in the working plate are higher in the alloy 2024 T3 for the same parameters of the plunge stage. Equivalent plastic strain is higher for 2024 T351 alloy, and the highest values are determined under the tool shoulder and around the to...ol pin. For the alloy 2024 T3, equivalent plastic strain is the highest in the influence zone of the tool pin.
Ključne reči:
friction stir welding / numerical simulation / temperature fields / heat generation / equivalent plastic strainIzvor:
Thermal Science, 2016, 20, 1, 247-254Izdavač:
- Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
Finansiranje / projekti:
- Razvoj tehnologije izrade obloge i jezgra na bazi domaćih sirovina za proizvodnju specijalnih obloženih elektroda namenjenih za elektrolučno zavarivanje čelika (RS-MESTD-Technological Development (TD or TR)-34016)
- Održivost i unapređenje mašinskih sistema u energetici i transportu primenom forenzičkog inženjerstva, eko i robust dizajna (RS-MESTD-Technological Development (TD or TR)-35006)
DOI: 10.2298/TSCI150313059V
ISSN: 0354-9836
WoS: 000373314400023
Scopus: 2-s2.0-84963517277
Kolekcije
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Veljić, Darko AU - Međo, Bojan AU - Rakin, Marko AU - Radosavljević, Zoran M. AU - Bajić, Nikola PY - 2016 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3439 AB - Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the material is done at different rotating speeds. A 3-D finite element model for thermomechanical simulation is developed. It is based on arbitrary Lagrangian-Eulerian formulation, and Johnson-Cook material law is used for modelling of material behaviour. From comparison of the numerical results for alloys 2024 T3 and 2024 T351, it can be seen that the former has more intensive heat generation from the plastic deformation, due to its higher strength. Friction heat generation is only slightly dfferent for the two alloys. Therefore, temperatures in the working plate are higher in the alloy 2024 T3 for the same parameters of the plunge stage. Equivalent plastic strain is higher for 2024 T351 alloy, and the highest values are determined under the tool shoulder and around the tool pin. For the alloy 2024 T3, equivalent plastic strain is the highest in the influence zone of the tool pin. PB - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd T2 - Thermal Science T1 - Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351 EP - 254 IS - 1 SP - 247 VL - 20 DO - 10.2298/TSCI150313059V ER -
@article{ author = "Veljić, Darko and Međo, Bojan and Rakin, Marko and Radosavljević, Zoran M. and Bajić, Nikola", year = "2016", abstract = "Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the material is done at different rotating speeds. A 3-D finite element model for thermomechanical simulation is developed. It is based on arbitrary Lagrangian-Eulerian formulation, and Johnson-Cook material law is used for modelling of material behaviour. From comparison of the numerical results for alloys 2024 T3 and 2024 T351, it can be seen that the former has more intensive heat generation from the plastic deformation, due to its higher strength. Friction heat generation is only slightly dfferent for the two alloys. Therefore, temperatures in the working plate are higher in the alloy 2024 T3 for the same parameters of the plunge stage. Equivalent plastic strain is higher for 2024 T351 alloy, and the highest values are determined under the tool shoulder and around the tool pin. For the alloy 2024 T3, equivalent plastic strain is the highest in the influence zone of the tool pin.", publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd", journal = "Thermal Science", title = "Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351", pages = "254-247", number = "1", volume = "20", doi = "10.2298/TSCI150313059V" }
Veljić, D., Međo, B., Rakin, M., Radosavljević, Z. M.,& Bajić, N.. (2016). Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351. in Thermal Science Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 20(1), 247-254. https://doi.org/10.2298/TSCI150313059V
Veljić D, Međo B, Rakin M, Radosavljević ZM, Bajić N. Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351. in Thermal Science. 2016;20(1):247-254. doi:10.2298/TSCI150313059V .
Veljić, Darko, Međo, Bojan, Rakin, Marko, Radosavljević, Zoran M., Bajić, Nikola, "Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351" in Thermal Science, 20, no. 1 (2016):247-254, https://doi.org/10.2298/TSCI150313059V . .